Thermaltake
Thermaltake Toughpower SFX 450W Gold PS-STP-0450FPCGUS-G power supply
SFX power supply delivering 450 W continuous power with 80 PLUS Gold efficiency, fully modular cables and a zero-RPM smart fan for quiet operation
- TypeIntel SFX 12V 3.3 / ATX 12V 2.4
- Maximum Power450 W
- Fans1 x 80mm Double Ball Bearing Fan (Zero RPM Smart Fan System)
- PFCActive
- Main Connector20+4Pin
- +12V RailsSingle
- 80 PLUS Gold certification delivers up to 90% efficiency reducing power loss
- Fully modular flat cables simplify cable management for cleaner builds
- Single +12V rail rated at 37A provides stable power delivery
- Zero RPM smart fan system stops fan at low loads for silent operation
- SFX to ATX adapter bracket included enables installation in standard ATX cases
Thermaltake Toughpower SFX 450W Gold
This SFX form-factor power supply delivers 450 W of continuous power with 80 PLUS Gold certified efficiency above 90 percent. A fully modular cable set and an included SFX-to-ATX adapter bracket allow installation in both compact and standard chassis. The unit meets Intel SFX 12V 3.3 and ATX 12V 2.4 specifications.
Best for compact builds needing efficient.
Builders assembling small-form-factor systems who want full modular cabling and Gold-level efficiency will find this unit a direct fit. The single +12 V rail rated at 37 A supports modern graphics cards requiring two 6+2-pin PCIe connectors. Buyers needing more than 450 W total output or more than three SATA power connectors should look at higher-capacity models.
450 W continuous power with 80 PLUS Gold efficiency
The 450 W rating is the decisive specification; it sets the hard limit for total system draw. Active PFC, a 100-240 V input range and protections including over-voltage, under-voltage and short-circuit complete the core feature set. A 16 ms minimum hold-up time and 100-500 ms power-good signal meet the stated ATX 12V 2.4 timing requirements.
Highlights
- 80 PLUS Gold certification delivers up to 90% efficiency reducing power loss
- Fully modular flat cables simplify cable management for cleaner builds
- Single +12V rail rated at 37A provides stable power delivery
- Zero RPM smart fan system stops fan at low loads for silent operation
- SFX to ATX adapter bracket included enables installation in standard ATX cases
Specifications
| Brand | Thermaltake |
|---|---|
| Series | Toughpower SFX 450W |
| Model | PS-STP-0450FPCGUS-G |
| Type | Intel SFX 12V 3.3 / ATX 12V 2.4 |
| Maximum Power | 450 W |
| Fans | 1 x 80mm Double Ball Bearing Fan (Zero RPM Smart Fan System) |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 2 x 6+2-Pin |
| SATA Power Connector | 3 |
| Modular | Full Modular |
| Power Good Signal | 100-500ms |
| Hold-up Time | 16ms min. |
| Efficiency | > 90% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Over Voltage Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 3.5A - 7A |
| Output | +3.3V@19A, +5V@14A, +12V@37A, [email protected] , [email protected] |
| MTBF | >120,000 Hours |
| Approvals | CE / FCC / UL / Bauart Mark+CB / EAC certification |
| Connectors | 1 x 24-pin ATX main connector 1 x 4+4pin EPS 12V connector 2 x 6+2 PCI-E 3 x SATA connectors 2 x Peripheral & 1 x FDD connectors |
| Features | Compliance with Intel SFX 12V 3.3 and ATX 12V 2.4 Standards 80 PLUS Gold Certified - 90% efficiency under typical load Single +12V rail Design Full Modular Design 100% 105 degree C / 221 degree F Japanese Brand Main Capacitors. 80mm Double Ball Bearing Fan Zero RPM Smart Fan System ATX bracket included Over Power, Over Voltage, Over Current and Short-Circuit protections |
| Dimensions | 2.50" x 3.94" x 4.90" |
| Shipping weight | 1.70 kg |
| Package size | 185 × 165 × 97 mm |
Questions about this item
How loud and hot does the 80mm double ball bearing fan get during all-day operation?
The Zero RPM Smart Fan System stops the fan at low loads and spins it up only when temperatures rise, keeping noise minimal and heat controlled during extended use.
What cables or connectors must I already have to use the fully modular design?
You only need the cables supplied with the unit — 20+4-pin main, two 6+2-pin PCIe and three SATA connectors — because every output is detachable at the PSU side.
Will the single +12V rail rated at 37A work reliably with older components that expect multi-rail limits?
Yes, the single +12V rail delivers up to 37A without per-rail caps, so legacy parts draw exactly what they need without tripping over-current protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



