Tripp Lite
Tripp Lite EVMA1530X PDU 42-Outlet 208V 30A 24xC13 18xC39 0U Vertical
Distributes 208 V three-phase power across 24 C13 and 18 C39 outlets with hot-swappable gigabit management and zero-trust security in a 0U vertical form
- TypePower Distribution Units
- Rack Size0U
- Output Voltage230 V AC
- Output Watts (VA)8600 W
- Output Connector(s)24 x IEC 60320 C13 18 x IEC 60320 C39
- Maximum Output Current30 A
- 42 outlets power high-density racks with 24 C13 and 18 C39 connectors
- Managed network module enables remote monitoring and zero-touch provisioning across distributed sites
- 208 V three-phase input delivers 8.6 kW capacity for demanding server loads
- 0U vertical form factor fits 42U cabinets without consuming rack space
- Circuit breaker protection safeguards connected equipment from overload conditions
Enterprise PDU for 42U Racks
The Eaton EVMA1530X is a managed three-phase power distribution unit built for 42U racks in enterprise data centres, colocation facilities or distributed IT infrastructure. It supplies 208V output at up to 8.6 kW through 42 locking outlets. The unit targets administrators who need centralised, cyber-secure power management across dense server rows. It is not for buyers who need single-phase input or fewer than 42 outlets.
0U Vertical Mount with NEMA L15-30P Input
The 0U vertical chassis fits alongside equipment without consuming rack units, measuring 172.97 cm tall by 5.08 cm wide by 5.28 cm deep. A 10 ft cord ending in a NEMA L15-30P plug connects to a 30 A three-phase feed. Twenty-four C13 and eighteen C39 receptacles accept standard server cords, freeing horizontal space for compute gear. Builders without a 30 A three-phase circuit cannot use this PDU.
Sustained 8.6 kW Load with Hot-Swap Network Module
The PDU is rated for continuous 8.6 kW delivery at 230 V AC with integral circuit-breaker protection. An embedded hot-swappable gigabit network module enables real-time monitoring, trend charts and prioritised alerts without powering down the rack. Chain-of-trust encryption and secure firmware boot harden the management plane during extended operation. Sites lacking compatible Eaton Brightlayer software lose automated response and remote troubleshooting features.
Highlights
- 42 outlets power high-density racks with 24 C13 and 18 C39 connectors
- Managed network module enables remote monitoring and zero-touch provisioning across distributed sites
- 208 V three-phase input delivers 8.6 kW capacity for demanding server loads
- 0U vertical form factor fits 42U cabinets without consuming rack space
- Circuit breaker protection safeguards connected equipment from overload conditions
Specifications
| Brand | Eaton |
|---|---|
| Model | EVMA1530X |
| Part Number | EVMA1530X |
| Type | Power Distribution Units |
| Rack Size | 0U |
| Output Voltage | 230 V AC |
| Output Watts (VA) | 8600 W |
| Output Connector(s) | 24 x IEC 60320 C13 18 x IEC 60320 C39 |
| Maximum Output Current | 30 A |
| Shipping weight | 9.07 kg |
| Package size | 1905 × 203 × 152 mm |
Questions about this item
How much continuous current can the 208 V three-phase input handle before the circuit breaker trips?
The NEMA L15-30P input is rated for 30 A and is protected by an internal circuit breaker that will open if that limit is exceeded.
Does the PDU add noticeable heat or fan noise when fully loaded at 8.6 kW in a closed rack?
The unit is a passive distribution device with no fans; all heat comes from the connected equipment, not from the PDU itself.
Which rack mounting hardware must already be in place for the 0U vertical chassis to install?
The 172.97 cm tall enclosure fits a standard 42U rack and uses the rack’s own vertical mounting rails — no extra brackets are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
$39.99
0.00051706BTC
In stock