We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with dual SFP+ cages and PCIe x8 gold fingers

Value Brand

Value Brand 10Gb Dual SFP+ PCIe 2.0 x8 Network Card BCM57810S

SKU CH-YNJN-6T97A

Dual SFP+ 10Gb Ethernet card using Broadcom BCM57810S controller, PCIe 2.0 x8 with low-profile and full-height brackets

  • TypePCI Express to Ethernet Port Card
  • Dual SFP+ ports enable 10 Gb networking
  • Broadcom BCM57810S controller supports SR-IOV virtualization
  • PCIe 2.0 x8 interface fits x8 or x16 slots
  • Broad OS support including Windows Server and Linux
  • Low-profile and full-height brackets included for any chassis

Dual 10Gb SFP+ Ports

This PCIe 2.0 x8 network card adds two 10Gb SFP+ ports to a server or workstation. It is built around the Broadcom BCM57810S controller and supports SR-IOV for virtualised workloads. The card fits both standard and low-profile slots thanks to the included brackets. It targets administrators who need 10Gb connectivity without moving to a newer bus generation.

PCIe 2.0 x8 Bandwidth

The x8 lane interface delivers 5.0 GT/s per lane, which is sufficient for dual 10Gb line-rate traffic under typical loads. Heavy simultaneous bidirectional streams can saturate the bus because the 2.0 generation caps total throughput below the theoretical maximum of two full 10Gb links. Users planning sustained wire-speed on both ports should verify their platform provides a true x8 electrical connection rather than a physical x16 slot wired for fewer lanes.

Broad OS Compatibility

Drivers are supplied for Windows 7 through 10, Windows Server 2008 through 2019, Linux distributions including CentOS, RHEL, Ubuntu, Debian and SLES, plus FreeBSD and VMware ESXi 6 and 7. The card does not support operating systems released after the listed versions, so deployments on newer hypervisors or distributions may require manual driver integration. Buyers needing guaranteed out-of-the-box support for current releases should confirm compatibility before purchase.

Highlights

  • Dual SFP+ ports enable 10 Gb networking
  • Broadcom BCM57810S controller supports SR-IOV virtualization
  • PCIe 2.0 x8 interface fits x8 or x16 slots
  • Broad OS support including Windows Server and Linux
  • Low-profile and full-height brackets included for any chassis

Specifications

TypePCI Express to Ethernet Port Card

Questions about this item

Will the PCIe 2.0 x8 interface run at full speed in my older PCIe 2.0 x16 slot?

Yes, the card is compatible with PCIe x8 and x16 slots and operates at 5.0 G T/s across eight lanes.

Which LED or software indicator confirms both 10Gb SFP+ ports have established a link?

Link status is shown by the port LEDs on the bracket and by the driver interface in Windows Server 2019 or Linux once the Broadcom BCM57810S driver loads.

Does the package include SFP+ transceivers or DAC cables, or must I purchase them separately?

The box contains the network card, a driver CD, and both low-profile and full-height brackets; SFP+ modules, DAC or AOC cables are not included and must be bought separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.