SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497241BTC
In stock
Vantec
Vantec UGT-M2PC130 M.2 NVMe PCIe x4 low-profile expansion card 110mm
Adds an M.2 NVMe slot supporting drives up to 110 mm long in a low-profile PCIe x4 card
- TypePCI Express to M.2 Card
- External Ports1 x M.2 (NGFF), M Key
- Internal Ports1 x PCIe x4 Slot
- Operating Systems SupportedWindows 7/8/8.1/10, or Linux
- CompatibilityM.2 Type Support: NVMe SSD using M Key only M.2 size: Length
- SpecificationsInternal Interface: 1 x M.2 (NGFF), M Key PCIe Interface: PC
- Fits 1U rack servers with ultra-low profile design
- Accepts M.2 NVMe drives up to 110 mm length
- Runs on PCIe 4.0 x4 bandwidth for NVMe 4.0 speeds
- Works in x4, x8 or x16 slots across PCIe generations
- Bus-powered at 3.3 V with included heatsink for thermal management
Low-profile M.2 NVMe adapter
This PCIe add-on card lets you install an M-key NVMe drive in a 1U rack-mount or low-profile chassis. It accepts modules up to 110 mm long and draws 3.3 V power directly from the slot, so no extra cables are required.
Fits x4, x8 or x16 slots
The card uses a PCIe x4 electrical interface that is backward compatible with v2.0 and v1.0 platforms. Its ultra-low profile design eliminates the need for a separate bracket, freeing the rear-panel opening for other expansion cards.
Full-length heat sink included
A full-length heat sink and thermal pad cover the installed module to dissipate heat during sustained workloads. The adapter supports booting on UEFI systems and operates under Windows 7 through 10 or Linux without additional drivers.
Highlights
- Fits 1U rack servers with ultra-low profile design
- Accepts M.2 NVMe drives up to 110 mm length
- Runs on PCIe 4.0 x4 bandwidth for NVMe 4.0 speeds
- Works in x4, x8 or x16 slots across PCIe generations
- Bus-powered at 3.3 V with included heatsink for thermal management
Specifications
| Brand | VANTEC |
|---|---|
| Model | UGT-M2PC130 |
| Type | PCI Express to M.2 Card |
| External Ports | 1 x M.2 (NGFF), M Key |
| Internal Ports | 1 x PCIe x4 Slot |
| Operating Systems Supported | Windows 7/8/8.1/10, or Linux |
| Compatibility | M.2 Type Support: NVMe SSD using M Key only M.2 size: Length support 22x110, 22x80, 22x60, 22x42mm |
| Specifications | Internal Interface: 1 x M.2 (NGFF), M Key PCIe Interface: PCIe v4.0/v3.0/v2.0/v1.0 x4 (4 lanes) Power: PCIe Bus powered (3.3V) |
| Features | Ultra-Low Profile height to fit into 1U Rack Mount Design for Low Profile Chassis with no Bracket needed for PCIe slot Support Extra Long M.2 NVMe 110mm, 80, 60, 42, 30 Fast PCI Express v4.0/v3.0 Specs to NVMe v4.0 via PCIe x4, x8, or x16 slot Full-Length heat sink and heat management for NVMe module Support Booting with Latest UEFI System Boards and OS Support backward compatible with PCI Express v2.0 / v1.0 Supports system boards with PCIe x4,x8,x16 slots Uses minimum power from PCIe 3.3V for better power management |
| Dimensions | 5.1" x 1.2" x 0.4" |
| Weight | 4 oz. |
| Package Contents | M.2 NVMe PCIe x4 Low Profile Adapter Quick Installation Guide Mount and Screws set Heat Sink and Heat pad |
| Shipping weight | 0.23 kg |
| Package size | 152 × 51 × 20 mm |
Questions about this item
What is the longest M.2 NVMe drive this card can hold?
The card accepts M.2 NVMe drives up to 110 mm in length, along with 80 mm, 60 mm, 42 mm and 30 mm sizes.
Does the adapter need extra power or cooling when running continuously?
It draws 3.3 V from the PCIe bus and includes a full-length heat sink with a thermal pad, so no external power or active cooling is required.
What motherboard slot and firmware are needed to boot from the installed drive?
A PCIe x4, x8 or x16 slot and a UEFI BIOS are required for boot support.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
