We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White low-profile DDR5 memory stick with RGB light bar

XPG

XPG Lancer Blade RGB DDR5 UDIMM 6400MHz 16GB Desktop RAM

SKU CH-TN8C-RJAR1

Low-profile DDR5 desktop memory with 16 GB capacity at 6400 MHz, customizable RGB lighting and support for Intel XMP 3.0 and AMD EXPO

  • Low-profile heatsink fits compact cases and clears tower coolers
  • Customisable RGB lighting with static, breathing, comet and music modes
  • DDR5 6400MHz speed for responsive desktop performance
  • Supports Intel XMP 3.0 and AMD EXPO for simple one-click overclocking
  • On-die ECC and PMIC deliver stable operation up to 85°C

Low-Profile DDR5 UDIMM for Compact Builds

This 16 GB DDR5 module runs at 6400 MHz with CL32-39-39 timings and a low-profile heatsink that clears tower CPU coolers. It targets builders who need high-speed memory in small chassis where standard-height sticks would not fit.

XMP 3.0 and AMD EXPO Profiles with RGB Control

On-board SPD profiles for Intel XMP 3.0 and AMD EXPO let the kit reach its rated speed without manual tuning. RGB lighting is handled through motherboard vendor software or the XPG Prime application, which can synchronise effects across other supported XPG components.

Straightforward Install.

The UDIMM form factor plugs into any DDR5 desktop slot and the 1.1 V–1.4 V range is standard for the platform. Because the heatsink is deliberately thin, clearance problems disappear, but buyers who want more than 16 GB per slot or who need ECC registered modules will have to look elsewhere.

Highlights

  • Low-profile heatsink fits compact cases and clears tower coolers
  • Customisable RGB lighting with static, breathing, comet and music modes
  • DDR5 6400MHz speed for responsive desktop performance
  • Supports Intel XMP 3.0 and AMD EXPO for simple one-click overclocking
  • On-die ECC and PMIC deliver stable operation up to 85°C

Specifications

No published specifications for this item yet.

Questions about this item

Will the low-profile heatsink on this 6400MHz DDR5 module need any thermal-paste refresh or fan cleaning over time?

The aluminium heatsink is a passive part with no moving components or thermal interface that degrades, so no routine maintenance is required.

What timing ceiling appears first when the 16GB kit runs at 6400MHz under sustained load?

The factory-rated CL32-39-39 latencies are the primary limit; the on-die ECC and PMIC keep operation stable up to the 85°C operating ceiling.

How much extra heat or noise does the RGB lighting add when the stick runs all day at 1.4V?

Lighting draws only a few watts and produces no audible noise; the low-profile heatsink dissipates the combined load without needing extra airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.