We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular DDR5 U-DIMM stick with RGB light bar

XPG

XPG Lancer RGB DDR5 U-DIMM 32GB 6400MHz White desktop RAM

SKU CH-MRD2-BCSSS

A 32 GB DDR5 U-DIMM running at 6400 MHz with customizable RGB lighting and on-die ECC for stability

  • Customizable RGB effects sync with music via motherboard software
  • On-die ECC corrects errors in real time for stability
  • Built-in PMIC improves power efficiency over DDR4 at 1.25-1.45V
  • 32GB DDR5 at 6400MHz CL32-39-39 for high throughput
  • Low-profile 8mm height fits tight builds at 72.4g

XPG Lancer RGB DDR5 32GB

The XPG Lancer RGB DDR5 U-DIMM provides 32GB of DDR5 memory rated at 6400MHz with CL32-39-39 timings. It operates between 1.25V and 1.45V and includes on-die ECC for real-time error correction. This kit suits builders who want high-frequency DDR5 with integrated lighting control.

Capacity and headroom at 6400MHz

At 32GB the module handles modern gaming and multitasking workloads comfortably, while the 6400MHz speed offers headroom over the 4800MT/s SPD baseline. The operating temperature range of 0°C to 85°C supports sustained loads, though the 1.45V upper voltage limit may constrain extreme overclocking attempts.

RGB software and PMIC benefits

Customisable RGB effects including static, breathing, comet and Music Mode are managed through major motherboard vendors' own lighting software. The onboard Power Management IC improves voltage stability and efficiency compared with DDR4, while on-die ECC adds a layer of data integrity without requiring platform-level ECC support.

Highlights

  • Customizable RGB effects sync with music via motherboard software
  • On-die ECC corrects errors in real time for stability
  • Built-in PMIC improves power efficiency over DDR4 at 1.25-1.45V
  • 32GB DDR5 at 6400MHz CL32-39-39 for high throughput
  • Low-profile 8mm height fits tight builds at 72.4g

Specifications

No published specifications for this item yet.

Questions about this item

Will this 6400MHz DDR5 kit run stably on a motherboard that only supports 4800MHz?

The module ships with an SPD speed of 4800 MT/s and CL40-39-39-77 at 1.1V, so it will boot at that base rate. To reach 6400MHz you must enable the XMP profile in BIOS.

How can I verify the on-die ECC is active after installation?

On-die ECC operates transparently inside the DRAM; there is no user-facing toggle or status light. Stability under sustained load at the rated 6400MHz CL32-39-39 timing indicates it is functioning.

Does the box contain any mounting hardware or do I need a separate RGB controller?

The package includes the 32GB U-DIMM module only. RGB lighting is managed through the motherboard vendor's software via the standard 5V addressable header; no extra controller is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.