We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm ARGB case fans in a pack

YESTON

YESTON Zeaginal ZC-ZHUISHEN TI White 3-Pack ARGB 120mm Case Fan

SKU CH-H75E-G2EJR

Three white 120mm ARGB fans deliver 76CFM airflow at 30dBA using fluid-dynamic bearings and PWM speeds of 900–2200RPM

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeFluid Dynamic
  • RPM900~2200RPM±10%
  • Air Flow76CFM
  • Quiet operation at just 30 dBA noise level
  • High airflow of 76 CFM for effective cooling
  • ARGB lighting with AURA SYNC compatibility
  • Fluid Dynamic Bearing for long-lasting reliability
  • PWM speed control from 900 to 2200 RPM

Three white ARGB fans in one kit

This pack contains three 120 mm case fans with addressable RGB lighting and fluid-dynamic bearings. Each unit spins between 900 and 2200 RPM via a 4-pin PWM connector. The white frame and transparent blades suit colour-coordinated builds. AURA SYNC support lets the LEDs synchronize with compatible motherboard software.

76 CFM airflow and 3.24 mmH₂O pressure

At full speed the fans move 76 CFM while producing 3.24 mmH₂O of static pressure, enough for unrestricted case ventilation or a standard radiator. Noise stays around 30 dBA at maximum RPM. The 25 mm thickness fits typical 120 mm mounting points. Lower PWM duty cycles reduce airflow and noise for lighter loads.

Replaces single stock fans or mixed kits

The three-fan bundle upgrades a chassis that ships with only one or two basic fans, delivering balanced intake and exhaust without mixing bearing types or LED standards. Builders who need more than three mounting positions or who prefer non-ARGB lighting will need additional or different units.

Highlights

  • Quiet operation at just 30 dBA noise level
  • High airflow of 76 CFM for effective cooling
  • ARGB lighting with AURA SYNC compatibility
  • Fluid Dynamic Bearing for long-lasting reliability
  • PWM speed control from 900 to 2200 RPM

Specifications

BrandYeston
SeriesZeaginal ZC-ZHUISHEN TI
Fan Counts3 Fans
TypeCase Fan
Fan Thickness25mm
Bearing TypeFluid Dynamic
RPM900~2200RPM±10%
Air Flow76CFM
Air Pressure3.24mmH20
Noise Level30dBA
Power Connector4 Pin
ColorWhite
LEDARGB
Dimensions120x120x25mm

Questions about this item

Will the 120 mm 4-pin PWM fans run quietly on an older motherboard that only supports 3-pin voltage control?

The fans use a 4-pin PWM connector; on a 3-pin header they will run at full 2200 RPM and produce up to 30 dBA, so speed control and the 900 RPM minimum are lost.

How can I confirm the ARGB lighting is synchronised with my Aura Sync motherboard after installation?

Connect the 5 V ARGB lead to the motherboard's 5 V addressable RGB header, then use the Aura Sync software — the LEDs should match the chosen effect without flicker.

Does the triple pack include the 5 V ARGB cables and any mounting screws, or must I buy them separately?

The pack contains three 120x120x25 mm fans with attached 4-pin PWM and 5 V ARGB cables; standard mounting screws are included, no extra parts are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.