We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sky Blue 1.75mm PLA filament spool in vacuum-sealed packaging

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Sky Blue

SKU CH-0Q28-YK670

PLA Pro filament prints smoothly at 190–220 °C with ±0.03 mm tolerance and vacuum-sealed 1 kg spool

  • ColorSky Blue
  • TypeFilament
  • Precise prints with ±0.03 mm tolerance
  • Dry filament guaranteed by vacuum-sealed packaging
  • Smooth extrusion, low shrinkage, strong layer adhesion
  • 37 vibrant colours including Sky Blue
  • Biodegradable PLA prints at 190-220 °C without heated bed

Reliable PLA for everyday printing

Ziro 3D PLA Pro filament is a 1.75 mm polylactic acid spool built for hobbyists, educators and small workshops that want consistent results without constant tuning. The material prints cleanly at 190 to 220 °C and does not require a heated bed, so it works on almost any FDM printer that accepts 1.75 mm stock. Each roll is vacuum sealed to stay dry until you open it.

One kilogram gives 330 metres of Sky Blue

A single spool supplies enough length for dozens of medium models or a few large prints before you need to swap rolls. Manufacturing tolerance is held to ±0.03 mm, keeping line width steady from the first layer to the last and reducing the risk of clogs or under-extrusion. Suggested print speeds of 30 to 90 mm/s cover both detail work and faster drafts, while an optional bed temperature of 50 to 60 °C helps adhesion on larger footprints.

Replaces generic or aged PLA that strings or warps

If your current filament shows inconsistent diameter, moisture bubbles or poor layer bonding, this spool upgrades the feedstock without changing printer settings. The jump is worth it when you need repeatable dimensions for functional parts or want a broader palette — 37 colours are available in the same series. It is not suited for high-temperature applications or engineering-grade mechanical loads.

Highlights

  • Precise prints with ±0.03 mm tolerance
  • Dry filament guaranteed by vacuum-sealed packaging
  • Smooth extrusion, low shrinkage, strong layer adhesion
  • 37 vibrant colours including Sky Blue
  • Biodegradable PLA prints at 190-220 °C without heated bed

Specifications

ColorSky Blue
TypeFilament

Questions about this item

Will the 1.75mm diameter and ±0.03mm tolerance work reliably with my older Creality Ender 3?

Yes, the filament is compatible with most FDM printers that use 1.75mm filament, including Creality models. The tight ±0.03mm tolerance ensures consistent extrusion on older machines.

How can I verify the filament is printing correctly at the suggested 190-220°C range?

Look for smooth extrusion, strong layer adhesion, and minimal stringing or warping. The low shrinkage and high purity of this PLA Pro should produce clean prints at the recommended 30-90mm/s speed.

Does the 1kg vacuum-sealed spool include a desiccant pack, or do I need to buy one separately?

The filament arrives vacuum-sealed with a desiccant pack inside the 209*209*73mm box to keep the 330m spool dry. No separate purchase is needed for immediate use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.