ZOTAC
ZOTAC GeForce RTX 3060 8GB Twin Edge OC graphics card ZT-A30630E-10M
Refurbished GeForce RTX 3060 with 8 GB GDDR6, 128-bit bus, dual-fan IceStorm 2.0 cooling and boost clock of 1777 MHz
- InterfacePCI Express 4.0
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 30 Series
- GPUGeForce RTX 3060
- Boost Clock1777 MHz
- CUDA Cores3584
- Boost clock 1777 MHz for responsive 1080p gaming
- 8GB GDDR6 memory at 15 Gbps handles modern textures
- IceStorm 2.0 cooling with FREEZE fan stop runs quiet at idle
- Four display outputs including HDMI 2.1 and three DisplayPort 1.4a
- PCI Express 4.0 interface on a compact 224 mm dual-slot card
8GB GDDR6 128-bit graphics card
The ZOTAC GeForce RTX 3060 Twin Edge OC is a refurbished graphics card built on the NVIDIA Ampere architecture with 3584 CUDA cores and an 8GB GDDR6 frame buffer across a 128-bit bus. It connects via PCI Express 4.0 and targets 1080p or 1440p gaming as well as entry-level content creation workloads. The boost clock reaches 1777 MHz while the memory runs at 15 Gbps.
Sustained 170W load behaviour
Under continuous load the GPU operates at its 170W thermal design power with a single 8-pin power connector drawing from a recommended 600W supply. The IceStorm 2.0 cooler uses double fans governed by Active Fan Control to maintain the 1777 MHz boost clock over extended sessions rather than only in short bursts. FREEZE fan stop halts the fans completely when temperatures drop below the trigger threshold.
Thermals noise and power draw
In typical gaming scenarios the dual-fan layout keeps thermals in check while the FREEZE feature eliminates fan noise during light desktop use or media playback. The card occupies two slots and measures 224 mm in length, fitting a wide range of chassis. HDCP 2.3 support enables protected 4K playback across the HDMI 2.1 and three DisplayPort 1.4a outputs.
Highlights
- Boost clock 1777 MHz for responsive 1080p gaming
- 8GB GDDR6 memory at 15 Gbps handles modern textures
- IceStorm 2.0 cooling with FREEZE fan stop runs quiet at idle
- Four display outputs including HDMI 2.1 and three DisplayPort 1.4a
- PCI Express 4.0 interface on a compact 224 mm dual-slot card
Specifications
| Brand | ZOTAC |
|---|---|
| Series | Twin Edge OC |
| Model | ZT-A30600H-10M |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 |
| Boost Clock | 1777 MHz |
| CUDA Cores | 3584 |
| Effective Memory Clock | 15 Gbps |
| Memory Size | 8GB |
| Memory Interface | 128-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Cooler | Double Fans |
| Thermal Design Power | 170W |
| Recommended PSU Wattage | 600W |
| Power Connector | 1 x 8-Pin |
| HDCP Ready | 2.3 |
| Max GPU Length | 224 mm |
| Slot Width | 2 Slots |
| Shipping weight | 1.00 kg |
| Package size | 290 × 218 × 83 mm |
Questions about this item
How much noise and heat does the Twin Edge OC produce under sustained load?
IceStorm 2.0 cooling with Active Fan Control and FREEZE fan stop keeps the card quiet at idle; under load the double-fan cooler manages the 170 W TDP within a 2-slot form factor.
Which power connector and PSU capacity are required to run this RTX 3060?
One 8-pin PCIe power connector is needed and a 600 W power supply is recommended.
Will the HDMI 2.1 and three DisplayPort 1.4a outputs drive my existing 4K monitors?
Yes, the four display outputs support up to 7680 x 4320 resolution and HDCP 2.3 for protected content.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



