Zyvpee
Zyvpee AD1212HB-F93GP 120x38mm 3-pin case fan
A 120 mm square axial cooler with a 38 mm thick frame, dual-ball bearing and a three-pin power connector
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dual ball bearing extends service life
- 120 mm by 38 mm fits standard mounts
- 3-pin DC connector enables speed monitoring
- 95 A draw delivers strong airflow
- Black non-LED design suits any build
120 mm 38 mm thick axial fan
The Zyvpee AD1212HB-F93GP is a 120 mm square frame fan with a 38 mm depth designed for case cooling. It runs on 12 V DC and draws 1.95 A through a standard three-pin power connector. The two-ball bearing assembly targets builders who need reliable airflow in standard mounting positions.
Three-pin voltage control limits
A three-pin connector supplies power and a tachometer signal but does not carry a PWM wire. Speed is therefore adjusted by varying the supply voltage, which typically offers a narrower control range than four-pin PWM control. The fan will run at full speed if the header cannot reduce voltage, so check whether your board or controller supports voltage-based regulation.
Clearance and header check before ordering
Measure the available depth in your chassis to confirm a 38 mm thick fan fits without fouling cables or side panels. Verify that the motherboard or fan controller provides a three-pin header rated for at least 1.95 A at 12 V. The non-LED black frame suits builds that prefer no lighting.
Highlights
- Dual ball bearing extends service life
- 120 mm by 38 mm fits standard mounts
- 3-pin DC connector enables speed monitoring
- 95 A draw delivers strong airflow
- Black non-LED design suits any build
Specifications
| Series | AD1212HB-F93GP |
|---|---|
| Model | AD1212HB-F93GP |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 120mm*120mm*38mm |
Questions about this item
Which version of the AD1212HB-F93GP should I choose for a 120 mm fan slot?
The AD1212HB-F93GP is a single 120 mm by 38 mm model with a 3-pin connector, so it fits standard 120 mm mounting holes that can accommodate the 38 mm thickness.
What does the 1.95 A current rating mean once the fan is installed?
At 12 V the fan draws up to 1.95 A, so your motherboard header or fan controller must supply at least that much current on the 12 V rail.
What does the 3-pin connector cap in practice?
The 3-pin connector provides power and a tachometer signal but no PWM wire, so speed is controlled by varying the DC voltage rather than a PWM duty cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
$0.82
0.0000105BTC
In stock