We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40 by 10 millimetre case fan with three wires and maglev bearing

Zyvpee

Zyvpee HA40101V4-0000-C99 40x10mm 12V 0.8W 3-pin Maglev case fan

SKU CH-GVJW-A7D66

A 40 mm by 10 mm maglev case fan running up to 1600 RPM on 12 V and 0.8 W with a 3-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for longer life
  • 12 V 0.8 W draws minimal power from the system
  • 3-pin connector fits standard motherboard headers
  • 40×10 mm size suits compact IPC cases
  • Under 1600 RPM keeps noise low

Zyvpee 40×10 mm maglev case fan

The Zyvpee HA40101V4-0000-C99 is a 40 mm square, 10 mm thick case fan built for industrial PC chassis and compact enclosures. It runs on 12 V DC, draws 0.8 W and connects through a standard three-pin power header. The maglev bearing and black non-LED frame target system integrators who need reliable airflow in tight spaces without lighting distractions.

Sustained-load behaviour

At speeds below 1600 RPM the maglev bearing maintains consistent rotation with minimal friction, allowing the fan to deliver steady airflow during continuous operation. The low 0.8 W power draw limits heat contribution inside the chassis while the three-pin connection provides a stable voltage supply for uninterrupted running. This combination suits always-on IPC workloads where acoustic and thermal stability matter more than peak burst performance.

Upgrade context

The fan replaces older 4010 sleeve or ball-bearing units that have developed noise or vibration after extended service. The jump is worthwhile when the existing cooler exceeds acceptable acoustic levels or when bearing wear threatens uptime in embedded or rackmount systems. Buyers who require PWM speed control or a four-pin header will need a different model, as this unit offers only fixed-voltage three-pin operation.

Highlights

  • Maglev bearing reduces friction for longer life
  • 12 V 0.8 W draws minimal power from the system
  • 3-pin connector fits standard motherboard headers
  • 40×10 mm size suits compact IPC cases
  • Under 1600 RPM keeps noise low

Specifications

BrandZyvpee
SeriesHA40101V4-0000-C99
ModelHA40101V4-0000-C99
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions40*10MM

Questions about this item

How loud and hot does the 12 V 0.8 W Maglev fan get when it spins at up to 1600 RPM all day?

The Maglev bearing reduces friction, so the fan runs quietly at its rated 1600 RPM while drawing only 0.8 W at 12 V, keeping heat output low.

My chassis has a standard 3-pin header — is that the only connection the HA40101V4-0000-C99 needs?

Yes, the fan uses a 3-pin power connector that plugs directly into a 12 V motherboard or controller header; no extra cables or adapters are required.

Will this 40 mm × 10 mm fan line up with the screw holes on my older 4010-size IPC case?

The 40 mm square frame matches the legacy 4010 mounting pattern, so it fits existing screw holes in older industrial cases.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.