Zyvpee
Zyvpee MC30100V2-000C-G99 30mm 5V 0.38W 3-pin mini cooling fan
A 30 mm Maglev case fan running at up to 1600 RPM on 5 V with a 3-pin connector
- TypeCPU Cooler Fan
- Fan Size30mm
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Compact 30 mm frame fits tight spaces
- Maglev bearing reduces friction for quiet operation
- 5 V, 0.38 W draw keeps power use low
- Three-pin connector enables speed monitoring
- Sub-1600 RPM speed balances airflow and noise
Compact 30 mm 5 V case fan
The Zyvpee MC30100V2-000C-G99 is a 30 mm square mini cooling fan that runs on a 5 V supply and draws 0.38 W. It uses a three-pin connector and a Maglev bearing for quiet operation in tight chassis spaces. The black, non-LED frame measures 30 by 30 by 10 mm.
Speed ceiling under 1600 RPM
The single specification that determines fit is the maximum rotational speed of less than 1600 RPM, which sets the airflow and noise profile for the 3010 series. Buyers who need higher static pressure or faster spin rates for dense radiators cannot meet that need with this model.
No bundled accessories or software
The package contains only the fan itself as shown in the product photos; no mounting screws, adapters or control software are included. Builders who require extra hardware for installation must source those parts separately.
Highlights
- Compact 30 mm frame fits tight spaces
- Maglev bearing reduces friction for quiet operation
- 5 V, 0.38 W draw keeps power use low
- Three-pin connector enables speed monitoring
- Sub-1600 RPM speed balances airflow and noise
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 3010 |
| Model | MC30100V2-000C-G99 |
| Type | CPU Cooler Fan |
| Fan Size | 30mm |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | mini cooling fan |
| Dimensions | 30*30*10mm |
| Package Contents | refer to title |
Questions about this item
How loud and forceful is the <1600 RPM figure when the fan is running inside a laptop?
At under 1600 RPM the 30 mm maglev fan moves a modest airflow suited to tight notebook heatsinks; expect a quiet whir rather than a strong blast.
What does the 3-pin connector actually control on this 5 V 0.38 W unit?
The three pins carry 5 V power, ground and a tachometer signal so the motherboard can monitor speed but cannot vary voltage for PWM control.
Will the 30 mm square by 10 mm thick frame screw into standard 3010 mounting holes?
Yes, the 30×30×10 mm dimensions match the 3010 form factor, so it fits the typical four-corner screw pattern used on many laptop CPU coolers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



