We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 92 mm square case fan with 38 mm depth and four-wire connector

Zyvpee

Zyvpee V92E12BUA7-07 92x38mm 12V 3.24A 4-wire case fan

SKU CH-PR47-X3EEX

A 92 mm by 38 mm DC case fan with dual ball bearings, 12 V 3.24 A power draw and a four-wire connector for PWM control

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector4 Wirse
  • ColorBlack
  • LEDNon-LED
  • 92 mm frame fits standard 90 mm mounts
  • 38 mm thickness enables high static pressure
  • 2 ball bearing design extends operational lifespan
  • 12 V 3.24 A input delivers strong airflow
  • 4 wire PWM connector allows precise speed control

Zyvpee 92×38 mm 12 V DC case fan

The Zyvpee V92E12BUA7-07 is a 92 mm by 38 mm case fan that runs on 12 V DC and draws 3.24 A through a four-wire connector. It uses a dual-ball bearing and carries no LED lighting, making it suited for builders who need a plain black airflow device for standard case mounting points.

Sustained-load behaviour with dual-ball bearing

The dual-ball bearing is rated for continuous rotation and resists the wear that sleeve bearings show after long periods at speed. Because the fan is specified at 3.24 A, the motor can maintain its airflow curve without the current drop-off seen in lower-rated designs, so thermal performance stays stable during extended workloads.

Verify connector and clearance before ordering

Check that your motherboard or fan controller provides a four-pin header able to supply 12 V at the rated current. Measure the mounting area to confirm the 92 mm by 38 mm footprint fits without fouling cables or adjacent components, and ensure the screw-hole pattern matches the standard 90 mm spacing used on this model.

Highlights

  • 92 mm frame fits standard 90 mm mounts
  • 38 mm thickness enables high static pressure
  • 2 ball bearing design extends operational lifespan
  • 12 V 3.24 A input delivers strong airflow
  • 4 wire PWM connector allows precise speed control

Specifications

BrandZyvpee
SeriesV92E12BUA7-07
ModelV92E12BUA7-07
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector4 Wirse
ColorBlack
LEDNon-LED
FeaturesDC Case fan
Dimensions92*38mm

Questions about this item

How much current does the 12 V 3.24 A motor draw when running continuously?

The fan is rated at 3.24 A on the 12 V rail, so it will pull that current whenever it spins at full speed.

What motherboard header is needed for the 4-wire connector?

A standard 4-pin PWM fan header on the motherboard or fan controller provides both power and speed control.

Will the 92 mm by 38 mm frame fit in a mount cut for a 90 mm fan?

The housing is 92 mm square, so it is slightly larger than a 90 mm cutout and will not line up with those screw holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.