Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-GTAE-MAJ2W

16 GB DDR5 4800 CL40 1Rx8 ECC registered RDIMM validated for Supermicro H14DST-F servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Pokaż jeszcze 30 konfiguracji
  • Exact DDR5-4800 CL40 1.1V spec ensures full-speed recognition on Supermicro H14DST-F
  • Registered ECC RDIMM design prevents silent data corruption under full-slot loads
  • 1Rx8 288-pin layout matches motherboard population rules for 16GB capacity
  • Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity at PC5-38400
  • Lifetime replacement warranty with US-based technical support backs every module

Exact DDR5-4800 RDIMM for Supermicro H14DST-F

This 16 GB registered ECC module matches the DDR5-4800 (PC5-38400) speed, 1.1 V voltage, CL40 timing and 1Rx8 rank that the Supermicro H14DST-F motherboard expects. It installs as a direct upgrade so the server recognises full capacity and runs at rated speed without manual tuning.

Registered ECC build with 288-pin form factor

The registered architecture buffers address and command signals, allowing every slot to be populated at full capacity while ECC corrects single-bit errors before they cause silent data corruption or unplanned reboots. No heat spreader is fitted, so airflow in dense server chassis passes freely over the DRAM chips.

Verify DIMM population rules before ordering

Server and motherboard memory support varies by model, so consult the system or motherboard manual for approved capacities, slot population order and installation steps. Buyers who need a different capacity, a non-ECC module or a UDIMM form factor should look elsewhere because this kit is a single 16 GB registered ECC RDIMM only.

Najważniejsze cechy

  • Exact DDR5-4800 CL40 1.1V spec ensures full-speed recognition on Supermicro H14DST-F
  • Registered ECC RDIMM design prevents silent data corruption under full-slot loads
  • 1Rx8 288-pin layout matches motherboard population rules for 16GB capacity
  • Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity at PC5-38400
  • Lifetime replacement warranty with US-based technical support backs every module

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does the DDR5 4800 interface on this module cap at PC5-38400 bandwidth?

Yes, the DDR5 4800 (PC5-38400) interface runs at its rated 4800 MT/s, delivering up to 38400 MB/s peak bandwidth per module.

What physical slot and form factor does this 288-pin RDIMM require on the Supermicro H14DST-F?

It fits a standard DDR5 288-pin RDIMM slot; the registered form factor is keyed for server motherboards and will not fit UDIMM or SODIMM sockets.

What is the correct installation step for this 1Rx8 registered ECC module that people often miss?

Follow the H14DST-F manual's DIMM population order exactly — registered modules must populate specific slots first for the memory controller to initialise all ranks at 4800 MT/s.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.