我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-GTAE-MAJ2W

16 GB DDR5 4800 CL40 1Rx8 ECC registered RDIMM validated for Supermicro H14DST-F servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-4800 CL40 1.1V spec ensures full-speed recognition on Supermicro H14DST-F
  • Registered ECC RDIMM design prevents silent data corruption under full-slot loads
  • 1Rx8 288-pin layout matches motherboard population rules for 16GB capacity
  • Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity at PC5-38400
  • Lifetime replacement warranty with US-based technical support backs every module

Exact DDR5-4800 RDIMM for Supermicro H14DST-F

This 16 GB registered ECC module matches the DDR5-4800 (PC5-38400) speed, 1.1 V voltage, CL40 timing and 1Rx8 rank that the Supermicro H14DST-F motherboard expects. It installs as a direct upgrade so the server recognises full capacity and runs at rated speed without manual tuning.

Registered ECC build with 288-pin form factor

The registered architecture buffers address and command signals, allowing every slot to be populated at full capacity while ECC corrects single-bit errors before they cause silent data corruption or unplanned reboots. No heat spreader is fitted, so airflow in dense server chassis passes freely over the DRAM chips.

Verify DIMM population rules before ordering

Server and motherboard memory support varies by model, so consult the system or motherboard manual for approved capacities, slot population order and installation steps. Buyers who need a different capacity, a non-ECC module or a UDIMM form factor should look elsewhere because this kit is a single 16 GB registered ECC RDIMM only.

商品特色

  • Exact DDR5-4800 CL40 1.1V spec ensures full-speed recognition on Supermicro H14DST-F
  • Registered ECC RDIMM design prevents silent data corruption under full-slot loads
  • 1Rx8 288-pin layout matches motherboard population rules for 16GB capacity
  • Samsung Micron Hynix OEM chips deliver enterprise-grade signal integrity at PC5-38400
  • Lifetime replacement warranty with US-based technical support backs every module

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the DDR5 4800 interface on this module cap at PC5-38400 bandwidth?

Yes, the DDR5 4800 (PC5-38400) interface runs at its rated 4800 MT/s, delivering up to 38400 MB/s peak bandwidth per module.

What physical slot and form factor does this 288-pin RDIMM require on the Supermicro H14DST-F?

It fits a standard DDR5 288-pin RDIMM slot; the registered form factor is keyed for server motherboards and will not fit UDIMM or SODIMM sockets.

What is the correct installation step for this 1Rx8 registered ECC module that people often miss?

Follow the H14DST-F manual's DIMM population order exactly — registered modules must populate specific slots first for the memory controller to initialise all ranks at 4800 MT/s.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。