Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Twelve green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DSG-O-CPU

SKU CH-6G25-WTRKB

A 576GB DDR5-5600 ECC registered RDIMM kit of twelve 48GB modules at 1.1V CL46, validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Pokaż jeszcze 30 konfiguracji
  • 576GB total capacity from twelve 48GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1V operation at 2Rx8 rank aligns with the H14DSG-O-CPU population rules
  • 288-pin RDIMM form factor fits the Supermicro motherboard's DIMM slots exactly

Exact DDR5-5600 RDIMM kit for Supermicro

This 576 GB kit contains twelve 48 GB DDR5-5600 RDIMM modules rated CL46 at 1.1 V. It is built for servers that require registered ECC memory and will only work in systems that accept 288-pin RDIMMs populated in the exact order the motherboard specifies.

DDR5 RDIMM population rules limit installation order

Registered DDR5 memory must be installed in the sequence the board's memory controller expects. Filling every slot with 2Rx8 modules works only when the platform supports that rank count per channel; otherwise the system will not post or will run at reduced capacity.

Verify board manual for supported capacity

Before ordering, check the Supermicro H14DSG-O-CPU manual for maximum memory per socket, approved DIMM population tables, and any BIOS version requirements. The kit will not function in boards that require UDIMMs, SODIMMs, or a different rank configuration.

Najważniejsze cechy

  • 576GB total capacity from twelve 48GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1V operation at 2Rx8 rank aligns with the H14DSG-O-CPU population rules
  • 288-pin RDIMM form factor fits the Supermicro motherboard's DIMM slots exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I choose the 12-module 576GB kit or a smaller capacity for my Supermicro H14DSG-O-CPU?

The 12-module 576GB kit fills all DIMM slots with matched 48GB 2Rx8 RDIMMs, giving maximum registered ECC capacity at DDR5 5600 without mixing ranks or speeds.

What does the DDR5 5600 CL46 rating deliver in a real Supermicro H14DSG-O-CPU server?

The modules run at the board's native DDR5 5600 transfer rate with CL46 latency and 1.1V operation, providing the exact timing and voltage the memory controller expects for full-speed stability.

How does the 288-pin RDIMM interface and registered ECC design affect usable performance?

The 288-pin registered RDIMM interface buffers address and command signals, allowing all 12 slots to operate at DDR5 5600 while ECC corrects single-bit errors to prevent data corruption.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.