Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 96GB 6x16GB 4800MHz CL40 1.1V ECC RDIMM Supermicro H14DSG-OM

SKU CH-NSJX-8WRMH

96GB DDR5 server kit with six 16GB ECC registered modules running at 4800MHz CL40 1.1V for Supermicro H14DSG-OM

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Pokaż jeszcze 30 konfiguracji
  • 96 GB total capacity lets you fully populate six slots
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory-controller requirements
  • Verified fitment for the Supermicro H14DSG-OM motherboard

Exact-match 96 GB DDR5 kit

This 96 GB kit contains six 16 GB DDR5-4800 registered ECC RDIMMs built to the precise 1Rx8 rank, 1.10 V voltage and CL40 timing the Supermicro H14DSG-OM memory controller expects. Each 288-pin module uses major-brand Samsung, Micron or Hynix chips and carries no heat spreader.

Suited for fully populated H14DSG-OM servers

Administrators who need every DIMM slot filled at rated speed with registered ECC stability will find this kit verified for that board. Builders using desktop boards, workstations that require unbuffered UDIMMs, or systems limited to lower capacities should select memory matched to those platforms.

Straightforward registered DIMM installation

Align the 288-pin key notch, press each module vertically until the retention clips lock, and follow the motherboard manual for the approved population sequence. Common issues arise when slots are filled in the wrong order, when unbuffered DIMMs are mixed with registered modules, or when the BIOS is not updated to support the full 96 GB configuration.

Najważniejsze cechy

  • 96 GB total capacity lets you fully populate six slots
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory-controller requirements
  • Verified fitment for the Supermicro H14DSG-OM motherboard

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will my Supermicro H14DSG-OM motherboard recognise all six 1Rx8 DDR5 RDIMMs at full 96GB capacity?

Yes, the kit matches the board's required 288-pin registered DDR5-4800 1.1V CL40 specification so the memory controller detects every module at rated speed and capacity.

Can I mix these 1.1V DDR5 RDIMMs with older DDR5 modules that run at a different voltage?

No, the motherboard supplies a single 1.1V rail for all DDR5 slots; mixing voltages prevents the system from training memory correctly and will cause boot failures.

How do I confirm the ECC registered RDIMMs are actively correcting errors after installation?

Check the BIOS memory information screen for ECC status 'Enabled' and review the IPMI or OS logs for corrected error counters incrementing during operation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.