NEMIX RAM 96GB 6x16GB DDR5 4800 CL40 ECC RDIMM Supermicro H13DSG-OM
- 96GB (6 x 16GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
96GB DDR5 server kit with six 16GB ECC registered modules running at 4800MHz CL40 1.1V for Supermicro H14DSG-OM
Size 96GB 6X16GB
This 96 GB kit contains six 16 GB DDR5-4800 registered ECC RDIMMs built to the precise 1Rx8 rank, 1.10 V voltage and CL40 timing the Supermicro H14DSG-OM memory controller expects. Each 288-pin module uses major-brand Samsung, Micron or Hynix chips and carries no heat spreader.
Administrators who need every DIMM slot filled at rated speed with registered ECC stability will find this kit verified for that board. Builders using desktop boards, workstations that require unbuffered UDIMMs, or systems limited to lower capacities should select memory matched to those platforms.
Align the 288-pin key notch, press each module vertically until the retention clips lock, and follow the motherboard manual for the approved population sequence. Common issues arise when slots are filled in the wrong order, when unbuffered DIMMs are mixed with registered modules, or when the BIOS is not updated to support the full 96 GB configuration.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit matches the board's required 288-pin registered DDR5-4800 1.1V CL40 specification so the memory controller detects every module at rated speed and capacity.
No, the motherboard supplies a single 1.1V rail for all DDR5 slots; mixing voltages prevents the system from training memory correctly and will cause boot failures.
Check the BIOS memory information screen for ECC status 'Enabled' and review the IPMI or OS logs for corrected error counters incrementing during operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?