Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 ECC RDIMM 2Rx4 server RAM

SKU CH-C2D2-Z8Y32

4GB DDR3 1333 ECC registered server DIMM with CL9 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity adds headroom for virtualised workloads
  • DDR3 1333 MHz speed matches PC3-10600 server specifications
  • ECC registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation optimises density per channel
  • 50 V standard voltage ensures broad platform compatibility

4GB DDR3 ECC RDIMM for HP servers

This A-Tech module delivers four gigabytes of registered DDR3 memory at 1333 MHz with CL9 latency. It is built for HP server and workstation platforms that require ECC error correction and registered signalling. The single 240-pin DIMM operates at the standard 1.50 V DDR3 voltage. Buyers upgrading compatible HP systems gain a direct replacement for several factory part numbers.

DDR3 1333 registered limits

The DDR3 1333 standard tops out at 10600 MB/s theoretical bandwidth per module. Registered DIMMs add a clock cycle of buffering, which stabilises heavy loads but prevents use in consumer desktop boards that expect unbuffered memory. ECC capability only functions when the platform chipset and BIOS support it; otherwise the module runs as non-ECC registered memory. Mixing registered and unregistered DIMMs in the same system is not supported by the DDR3 specification.

Check HP part list and slot count

Verify that your server or workstation lists one of the HP part numbers shown in the compatibility table before ordering. Confirm the motherboard provides 240-pin DDR3 DIMM slots and accepts registered ECC modules. Ensure the total installed memory does not exceed the platform's maximum supported capacity per channel or per system. Systems requiring unbuffered or non-ECC memory cannot use this module.

Pontos fortes

  • 4GB capacity adds headroom for virtualised workloads
  • DDR3 1333 MHz speed matches PC3-10600 server specifications
  • ECC registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation optimises density per channel
  • 50 V standard voltage ensures broad platform compatibility

Especificações

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Perguntas sobre este artigo

Should I pick the single 4 GB module or look for a larger kit?

This listing is a single 4 GB DDR3 1333 module; add more identical sticks to reach your server's supported capacity.

What does PC3-10600 mean for actual throughput in my server?

PC3-10600 is the JEDEC designation for DDR3 1333, so the module runs at 1333 MT/s with CL9 latency.

Will the 240-pin registered ECC interface work in my HP ProLiant?

The 240-pin RDIMM fits DDR3 server slots that require registered ECC; verify your model accepts 2Rx4 1.5 V modules.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.