Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green circuit boards with gold contacts and black chips in a clear plastic tray

A-Tech

A-Tech 64GB (4x16GB) DDR5-5600 ECC UDIMM 1Rx8 Server RAM Kit

SKU CH-GD8Z-QV16Y

Four 16 GB DDR5 ECC UDIMM modules running at 5600 MHz with CAS 40 and 1.10 V for server workloads

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB capacity across four 16 GB modules supports heavy server workloads
  • DDR5 5600 speed with PC5 44800 bandwidth accelerates data-intensive tasks
  • ECC unbuffered design with 1Rx8 rank corrects single-bit errors for data integrity
  • 1 V standard DDR5 voltage reduces power draw under load
  • 288 pin DIMM form factor fits compatible server and workstation memory slots

Capacity and purpose

This A-Tech kit provides 64 GB of DDR5 server memory across four 16 GB UDIMM modules. It is built for workstations and servers that require ECC unbuffered DIMMs with a single-rank x8 organisation. The kit is not suitable for standard desktop or laptop platforms that lack DDR5 ECC UDIMM support.

Thermals noise and power

Each module operates at the standard DDR5 voltage of 1.10 V without a heat spreader. Power draw scales with the 5600 MT/s data rate and the 1Rx8 density, producing modest heat that typical server airflow handles without additional cooling. Acoustic impact is negligible because the modules have no moving parts.

Sustained load behaviour

Under continuous workloads the quad-channel kit maintains its rated 5600 MT/s speed and CAS latency of 40. ECC protection corrects single-bit errors in real time, preserving data integrity during extended compute or virtualisation tasks. The major-brand DRAM ICs are validated for reliable operation at the specified voltage and timing.

Pontos fortes

  • 64 GB capacity across four 16 GB modules supports heavy server workloads
  • DDR5 5600 speed with PC5 44800 bandwidth accelerates data-intensive tasks
  • ECC unbuffered design with 1Rx8 rank corrects single-bit errors for data integrity
  • 1 V standard DDR5 voltage reduces power draw under load
  • 288 pin DIMM form factor fits compatible server and workstation memory slots

Especificações

BrandA-Tech
SeriesA-Tech DDR5 Server Memory RAM
ModelA-Tech 64GB (4x16GB) DDR5-5600 ECC UDIMM Server RAM Kit
Part NumberAT16G4D5D5600US8EC4N11V
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 SDRAM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 288-pin DDR5 UDIMM modules and which step is commonly missed?

Align the key notch on each 288-pin module with the slot, press firmly until both side clips click, and populate all four slots for quad-channel operation; the step often missed is checking the motherboard manual for the correct slot order to enable 1Rx8 quad-channel mode.

What maintenance or replacement will the 1.10V DDR5 ECC UDIMM kit need over time?

The modules have no heat spreader and no moving parts, so no scheduled maintenance is required; replacement is only needed if a module fails, which is covered by the lifetime warranty.

What limit appears first when the 5600 MHz quad-channel kit runs sustained workloads?

The CAS latency of 40 at DDR5-5600 sets the timing floor, and the 1.1V standard voltage limits further frequency scaling, so latency and voltage headroom become the first constraints under continuous load.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.