Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black rectangular ATX power supply with fixed cables and 135mm fan

APEVIA CORP.

APEVIA CORP. ATX-PR600W 600W 80 PLUS GOLD power supply

SKU CH-64BV-ZXECV MPN ATX-PR600W

A 600W ATX power supply with 80 PLUS Gold efficiency, active PFC, a 135mm fan, and connectors for two PCIe graphics cards

  • TypeATX12V
  • Maximum Power600 W
  • Fans1 x 135mm black fan
  • PFCActive
  • Main Connector20+4Pin
  • +12V RailsSingle
  • 80 PLUS Gold certified efficiency reduces wasted energy
  • Single +12V rail delivers 50 A for stable GPU power
  • Active PFC with 99 % power factor correction improves grid draw
  • 135 mm auto-thermal fan adjusts speed to keep temperatures low
  • 160 mm depth fits compact ATX cases while supplying 600 W

600 W 80 PLUS Gold ATX power supply

The APEVIA Prestige ATX-PR600W delivers 600 W of continuous power from a single +12 V rail rated at 50 A. It carries 80 PLUS Gold certification and active PFC rated at 99 % power-factor correction. A 135 mm auto-thermal black fan provides cooling without a manual voltage switch, accepting 115 V to 230 V input automatically.

Non-modular upgrade for older or budget builds

This unit replaces lower-efficiency bronze or unrated supplies in systems that need stronger +12 V capacity for modern CPUs and GPUs. The jump is worth it when your current PSU lacks 6+2-pin PCIe connectors, struggles with multi-core processors, or runs hot under load. DC-to-DC converter design improves dynamic response and rail stability compared with older group-regulated topologies.

Check case length and cable routing before ordering

The non-modular design means every cable is permanently attached, so verify 160 mm maximum PSU length fits your chassis and that fixed cables reach all connectors. Confirm your motherboard uses a 20+4 pin main and 4+8 pin EPS header, and count SATA and peripheral devices against the four SATA and four peripheral plugs provided.

Pontos fortes

  • 80 PLUS Gold certified efficiency reduces wasted energy
  • Single +12V rail delivers 50 A for stable GPU power
  • Active PFC with 99 % power factor correction improves grid draw
  • 135 mm auto-thermal fan adjusts speed to keep temperatures low
  • 160 mm depth fits compact ATX cases while supplying 600 W

Especificações

BrandAPEVIA
SeriesPrestige Series
ModelATX-PR600W
TypeATX12V
Maximum Power600 W
Fans1 x 135mm black fan
PFCActive
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector2 x 6+2-Pin
SATA Power Connector4
Max PSU Length160 mm
ModularNon-Modular
Energy-Efficient80 PLUS GOLD Certified
Over Voltage ProtectionYes
Input Voltage115 - 230V
Input Frequency Range50 - 60Hz
Input Current8A for 115VAC, 4A for 230VAC
Output+3.3V@20A, +5V@20A, +12V@50A, [email protected] , [email protected]
Connectors1 x 20/24pin Main Power
1 x 4/8 pin + 12V and EPS
4 x SATA
4 x Peripheral
2 x 6+2pin PCI Express
Features600W Power with 13.5cm black fan
80+ Gold & ROHS certified
High stability with 5% tolerance of 5V, 3.3V & 12V output
High quality components and housing
Universal AC input by active PFC (99%PF Typical)
Dimensions3.39" x 5.91" x 6.30"
Weight5.00 lbs.

Perguntas sobre este artigo

Will the 160 mm length fit my ATX case?

The unit is 160 mm long so it fits standard ATX cases; measure the available depth behind the motherboard tray to be sure.

Which cables must I route during a non-modular install?

All cables are fixed — route the 20+4 pin main, 4/8 pin CPU, two 6+2 pin PCIe, four SATA and four peripheral leads before securing the PSU.

How often should I clean the 135 mm fan?

Blow dust out of the 135 mm fan every 6–12 months; the fan is not user-replaceable so keep it clear to maintain airflow.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.