Axiom
Axiom SSDEV20DE240-AX enterprise SSD 240 GB 2.5" SATA 600
Enterprise 2.5" SATA 600 drive with hot-swap support, 520 MB/s reads and 245 MB/s writes
- 240 GB capacity supports read-intensive server workloads
- 520 MB/s sequential read speeds accelerate data access
- 245 MB/s sequential write speeds handle steady write streams
- Hot-swap 2.5" SATA 600 design enables drive changes without downtime
- RoHS certified build meets environmental compliance standards
240 GB SATA 600 enterprise SSD
The Axiom SSDEV20DE240-AX is a 2.5-inch internal solid-state drive built for hot-swap server bays. It connects through a SATA 600 interface and offers 240 GB of storage capacity for read-intensive workloads.
Suited for read-heavy server roles.
This drive suits administrators who need a hot-swappable SATA SSD for boot volumes, logging or read-heavy datasets where 520 MB/s reads are sufficient. It is not for write-heavy caching tiers or databases that demand sustained write speeds beyond 245 MB/s.
245 MB/s maximum write throughput
The decisive figure is the 245 MB/s maximum write transfer rate, which defines the workloads this drive can sustain. Sequential reads reach 520 MB/s, but the write ceiling determines whether the SSD fits a specific caching or logging role.
Pontos fortes
- 240 GB capacity supports read-intensive server workloads
- 520 MB/s sequential read speeds accelerate data access
- 245 MB/s sequential write speeds handle steady write streams
- Hot-swap 2.5" SATA 600 design enables drive changes without downtime
- RoHS certified build meets environmental compliance standards
Especificações
Ainda não há especificações publicadas para este artigo.
Perguntas sobre este artigo
What do the 520 MB/s read and 245 MB/s write figures mean once the drive is installed in a server?
Those are the maximum sequential transfer rates the Ev200 can sustain over the SATA 600 link; real-world throughput will be lower with mixed workloads or queue depth limits.
The spec lists SATA/600 — what interface standard is that and what throughput does it cap at?
SATA/600 is the 6 Gb/s SATA revision; it caps the drive at roughly 600 MB/s theoretical bandwidth, so the 520 MB/s read ceiling sits well within the link limit.
What does the 2.5-inch hot-swap form factor need to fit in my chassis?
It requires a standard 2.5-inch hot-swap drive bay with a SATA backplane connector; the drive slides directly into the carrier without cables.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
