Brute Networks
Brute Networks 882362?091 64GB DDR4-2666 4Rx4 1.2V 288-Pin Server RAM
64GB DDR4-2666 load-reduced ECC server module with 4Rx4 organisation runs at 1.20V for high-density HPE-compatible upgrades
- Capacity64GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredLoad Reduced
- 64 GB capacity supports dense virtualization workloads
- DDR4-2666 speed delivers 21300 MT/s data rate
- Load Reduced 4Rx4 architecture reduces electrical load on the memory bus
- 2 V operation lowers power draw per module
- 100 % HPE compatible validated with major-brand Samsung, SK Hynix or Micron chips
HPE Compatible 64GB DDR4-2666 Load Reduced DIMM
This 64GB DDR4-2666 module operates at 1.20V with a 4Rx4 Load Reduced design. It uses major brand chips from Samsung, SK Hynix or Micron and carries a lifetime warranty. The 288-pin form factor fits servers requiring PC4-21300 registered memory.
Suited for HPE servers needing maximum density per
Ideal for administrators expanding memory in compatible HPE platforms where 64GB Load Reduced DIMMs are qualified. Not for systems that accept only standard Registered or Unbuffered DDR4 modules. Buyers who need non-LRDIMM memory or lower capacities per module should look at other configurations.
4Rx4 Load Reduced architecture decides fit
The quad-rank 4Rx4 organisation with Load Reduced buffering determines electrical loading on the memory bus. Only platforms validated for this rank count and buffering type will recognise the full 64GB capacity. Verify the server qualified-vendor list for 882362?091 before purchase.
Pontos fortes
- 64 GB capacity supports dense virtualization workloads
- DDR4-2666 speed delivers 21300 MT/s data rate
- Load Reduced 4Rx4 architecture reduces electrical load on the memory bus
- 2 V operation lowers power draw per module
- 100 % HPE compatible validated with major-brand Samsung, SK Hynix or Micron chips
Especificações
| Brand | HPE |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Perguntas sobre este artigo
Will this 288-pin DDR4 module fit my server's memory slots?
The module uses the standard 288-pin DDR4 form factor and operates at 1.20V, matching the physical and electrical requirements of compatible server DIMM slots.
What is the correct way to install this load-reduced 4Rx4 module, and what step is often missed?
Align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, and ensure the load-reduced register is fully seated for proper signal buffering.
When will this 64GB DDR4-2666 module need replacement under normal server use?
Built with major-brand chips (Samsung, SK Hynix or Micron) and 100% validated, it is rated for continuous operation and covered by a lifetime warranty, so replacement is only needed if a fault develops.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



