Computer Memory Solutions
Computer Memory Solutions 32GB (4x8GB) DDR3 1600 CL11 240-Pin Dell Optiplex 9020 memory upgrade
Four 8 GB DDR3 1600 CL11 modules totalling 32 GB, validated for Dell Optiplex 9020 MT, SFF and USFF systems
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 32 GB total capacity across four 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing at 1.5 V
- 240-pin unbuffered non-ECC DIMMs for Dell OptiPlex 9020
- Lifetime warranty from Computer Memory Solutions
Dell Optiplex 9020 32GB kit
This 32GB kit contains four 8GB DDR3 1600 CL11 modules built for the Dell Optiplex 9020 in MT, SFF and USFF chassis. The unbuffered non-ECC DIMMs run at 1.5V with 11-11-11 timing and use major-brand chips. It is aimed at owners of those specific Optiplex models who need the maximum supported memory.
Upgrade from lower-capacity DDR3
The kit replaces any smaller DDR3 configuration currently installed in the Optiplex 9020, filling all four slots to reach the platform's 32GB limit. The jump is worthwhile when the existing memory is below that ceiling and the workload demands more simultaneous applications or larger datasets. Systems already at 32GB or those requiring ECC or registered modules will not benefit.
32GB capacity for multitasking headroom
Four ranks of 2Rx8 memory provide 32GB total, which comfortably handles heavy multitasking, virtual machines and large spreadsheets on the Optiplex 9020. The ceiling is the platform's four-slot maximum, so further expansion is not possible without a different motherboard. Workloads that exceed 32GB or need ECC protection must move to another system.
Pontos fortes
- 32 GB total capacity across four 8 GB modules
- DDR3 1600 MHz speed rated at PC3 12800
- CL11 latency with 11-11-11 timing at 1.5 V
- 240-pin unbuffered non-ECC DIMMs for Dell OptiPlex 9020
- Lifetime warranty from Computer Memory Solutions
Especificações
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800DIMM |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 9020 Mt/Sff/Usff |
| Package Content | 4 Memory RAM Sticks |
Perguntas sobre este artigo
Will the 240-pin DDR3 DIMMs fit the Dell Optiplex 9020 SFF chassis?
The kit is validated for the Optiplex 9020 MT, SFF and USFF form factors, so the standard-height 240-pin modules clear the SFF motherboard slots.
Do I need to populate all four slots in a specific order for the 32 GB kit to initialise?
Install the four 8 GB sticks in the four DIMM sockets; the system detects them automatically with no special slot sequence required.
When should I expect to replace these 1.5 V unbuffered modules?
They carry a limited lifetime warranty from the manufacturer, so replacement is only needed if a module fails or the platform is upgraded beyond DDR3.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



