Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR3 DIMMs with black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM10247210600ECCR2R4H 32GB (4x8GB) DDR3 1333 ECC Registered DIMM

SKU CH-MGGP-EZ2FS

A 32 GB kit of four 8 GB DDR3 ECC registered DIMMs running at 1333 MHz for Supermicro X8DTi and X8DTL server boards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 32 GB total capacity across four 8 GB modules
  • DDR3 1333 MHz speed rated at PC3 10600
  • ECC registered design with 2Rx4 organisation for data integrity
  • CL9 9-9-9 timing at 1.5 V for stable operation
  • Verified compatibility with Supermicro X8DTi-LN4F, X8DTL-3, X8DTL-6F, X8DTL-i

32GB DDR3 ECC Registered kit for Supermicro servers

This 32GB kit contains four 8GB DDR3 1333 ECC registered DIMMs built for Supermicro X8DTi-LN4F, X8DTL-3, X8DTL-6F and X8DTL-i platforms. It targets administrators upgrading or repairing dual-socket server boards that require registered memory with error correction. The modules operate at 1.5V with CL9 9-9-9 timings and use a 240-pin form factor.

Capacity and headroom across supported boards

Each supported motherboard offers eight DIMM sockets across two CPUs, organised as four banks of two per processor. The X8DTi-LN4F accepts up to 192GB total while the X8DTL-3, X8DTL-6F and X8DTL-i each support up to 96GB. This 32GB kit fills half the sockets on a fully populated dual-CPU X8DTi-LN4F or a single-CPU X8DTL system. Mixing registered and unbuffered ECC modules is not supported.

Registered ECC requirement decides fit

The memory controller on these Supermicro boards requires registered ECC DIMMs; unbuffered ECC or non-ECC modules will not function correctly. This kit provides exactly that registered ECC configuration at DDR3 1333 speed. Buyers whose boards demand unbuffered ECC or a different DDR generation cannot use this product.

Pontos fortes

  • 32 GB total capacity across four 8 GB modules
  • DDR3 1333 MHz speed rated at PC3 10600
  • ECC registered design with 2Rx4 organisation for data integrity
  • CL9 9-9-9 timing at 1.5 V for stable operation
  • Verified compatibility with Supermicro X8DTi-LN4F, X8DTL-3, X8DTL-6F, X8DTL-i

Especificações

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSUPERMICRO X8DTi-LN4F, X8DTL-3, X8DTL-6F, X8DTL-i
Package Content4 Memory RAM Sticks

Perguntas sobre este artigo

Will the 1333 MHz registered ECC modules run in my Supermicro X8DTL-3 alongside older unbuffered ECC sticks?

No, the board manual states mixing registered and unbuffered ECC is not supported; all slots must use registered modules like these.

How can I confirm the kit is running at the rated 1333 MHz and CL9 timings after installation?

Check the BIOS memory information screen or run CPU-Z; it should show DDR3-1333 at 9-9-9 timings and 1.5 V.

Does the package include only the four 8 GB DIMMs or are there extra brackets or cables?

Only the four 240-pin DDR3 registered ECC DIMMs are supplied; no brackets, cables or additional hardware are included.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.