DELL
DELL 2THX8 200GB SATA Enterprise SSD
200 GB SATA enterprise SSD for Dell PowerEdge servers from the S3710 series
- InterfaceSATA
- 200 GB capacity for write-intensive workloads
- SATA 6 Gbps interface for broad server compatibility
- 5 inch 7 mm form factor fits dense chassis
- MLC flash memory rated for high endurance
- Qualified for Dell PowerEdge R630, R730, R740 and more
Dell 200 GB SATA Enterprise SSD
This Dell 2THX8 drive provides 200 GB of write-intensive MLC storage over a 6 Gbps SATA interface in a 7 mm 2.5-inch form factor. It is built for Dell PowerEdge servers that require high endurance for database logging, caching or virtualization workloads.
Suited for PowerEdge arrays needing write-heavy
IT teams populating compatible PowerEdge models such as R630, R730, R740, R740XD, R840, R940, T640 or FC630 will find this drive validated for those platforms. Builders using non-Dell chassis, proprietary drive carriers or systems that demand higher capacities should evaluate other options.
6 Gbps SATA interface dictates compatibility
The drive connects through a standard SATA 6 Gbps port, so the server backplane or controller must expose that interface. A 2.5-inch bay with 7 mm height clearance is also required for physical installation.
Pontos fortes
- 200 GB capacity for write-intensive workloads
- SATA 6 Gbps interface for broad server compatibility
- 5 inch 7 mm form factor fits dense chassis
- MLC flash memory rated for high endurance
- Qualified for Dell PowerEdge R630, R730, R740 and more
Especificações
| Brand | Dell |
|---|---|
| Model | 2THX8, SSDSC2BA200G4R |
| Interface | SATA |
Perguntas sobre este artigo
Which Dell PowerEdge models is the 2THX8 200GB SSD validated for?
The 2THX8 is validated for Dell PowerEdge C6520, FC630, FC830, M630, M830, R230, R330, R430, R530, R540, R630, R640, R730, R730XD, R740, R740XD, R7425, R830, R840, R930, R940, R940xa, T330, T340, T430, T440, T630, T640.
What does the 200GB capacity mean for write-intensive workloads on this S3710 drive?
The 200GB capacity on the S3710 provides space for write-intensive workloads using MLC NAND, with a 7mm 2.5-inch form factor that fits standard SATA drive bays in the listed PowerEdge servers.
What does the 6Gbps SATA interface limit in practice for this SSD?
The 6Gbps SATA interface caps maximum sequential throughput at the SATA III line rate, so the SSDSC2BA200G4R will not exceed that bandwidth ceiling in any of the compatible PowerEdge systems.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
