DELL
DELL 4GN49 300 GB 15000 RPM 2.5" SAS internal hard drive
A 300 GB 15000 RPM 2.5" SAS internal hard drive with 64 MB buffer for Dell PowerEdge and PowerVault servers
- InterfaceSAS
- Capacity300GB
- RPM15000 RPM
- Form Factor2.5"
- 300 GB capacity stores large server datasets
- 15000 RPM spindle speed accelerates transaction-heavy workloads
- 6Gb/s SAS interface delivers consistent throughput for RAID arrays
- 64 MB buffer smooths burst I/O on Dell PowerEdge servers
- 5 inch form factor fits dense PowerVault and blade chassis
300 GB 15K SAS drive for PowerEdge servers
This Dell 4GN49 drive provides 300 GB of storage on a 2.5" SAS interface spinning at 15000 RPM. A 64 MB buffer supports sustained throughput for transactional workloads. It is a new component validated for internal server bays.
Suits administrators refreshing Dell PowerEdge
The part matches the listed PowerEdge models including T310, R310, R720, R720XD and M1000e plus PowerVault MD1120, MD1220 and MD3620 series. Builders without a SAS backplane or without a compatible Dell chassis cannot install this drive.
6Gb/s SAS interface decides fit
The drive communicates over a 6Gb/s SAS link, so the host controller or backplane must support that standard. If the system only offers a different interface, the drive will not function.
Pontos fortes
- 300 GB capacity stores large server datasets
- 15000 RPM spindle speed accelerates transaction-heavy workloads
- 6Gb/s SAS interface delivers consistent throughput for RAID arrays
- 64 MB buffer smooths burst I/O on Dell PowerEdge servers
- 5 inch form factor fits dense PowerVault and blade chassis
Especificações
| Interface | SAS |
|---|---|
| Capacity | 300GB |
| RPM | 15000 RPM |
| Form Factor | 2.5" |
Perguntas sobre este artigo
What real-world throughput does the 6Gb/s SAS interface deliver on this drive?
The 6Gb/s SAS link caps at 600 MB/s, though the 15000 RPM platters and 64 MB buffer typically sustain lower sequential rates in practice.
Will the .6 inch height fit a standard 2.5 inch drive bay in a PowerEdge R710?
Yes, the .6 inch profile matches the standard 2.5 inch form factor used in the R710 and other listed PowerEdge servers.
How is the drive installed in a hot-swap tray, and what step is often missed?
Slide the drive into the tray until the SAS connector seats firmly, then lock the lever; the step often missed is fully engaging the lever so the drive reports ready to the RAID controller.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



