DELL
DELL GKWHP 8TB 7.2K SAS 12Gb/s 3.5" 512e 400-AHJD internal hard drive
8 TB SAS hard drive spins at 7,200 RPM in a 3.5-inch bay for high-capacity server storage
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 8 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- SAS 12 Gb/s interface enables fast data transfers
- 5 inch form factor fits standard drive bays
- 512e advanced format improves storage efficiency
Dell 8 TB SAS 12 Gb/s Drive
This Dell GKWHP internal hard drive delivers 8 TB of storage on a 3.5-inch form factor. It spins at 7200 RPM and connects through a SAS 12 Gb/s interface. The 512e advanced format ensures compatibility with modern operating systems and applications. It is supplied new in OEM or retail packaging that may vary.
Suited for SAS-Equipped Arrays
The drive fits servers and storage arrays that accept 3.5-inch SAS drives running at 12 Gb/s. It works well for bulk data, backup targets and nearline workloads that benefit from high capacity and sustained throughput. Systems without a SAS controller or with only 2.5-inch bays cannot use this drive. Buyers needing a different interface or a smaller form factor should look elsewhere.
SAS 12 Gb/s Interface Decides Fit
The single specification that determines compatibility is the SAS 12 Gb/s interface. Your backplane, HBA or RAID card must support this exact protocol and speed. Without a matching SAS connection the drive will not function, regardless of capacity or spindle speed. Verify the host connector before purchase.
Pontos fortes
- 8 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- SAS 12 Gb/s interface enables fast data transfers
- 5 inch form factor fits standard drive bays
- 512e advanced format improves storage efficiency
Especificações
| Interface | SAS 12Gb/s |
|---|---|
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Perguntas sobre este artigo
Will the 7200 RPM motor require scheduled bearing replacement?
The 7200 RPM spindle is sealed and rated for continuous operation without a published bearing-replacement interval.
Does the SAS 12Gb/s interface or the 7200 RPM platters limit sustained throughput first?
The 7200 RPM platters set the sustained-transfer ceiling; the SAS 12Gb/s link provides headroom above that mechanical limit.
How much heat does the 8TB 7200 RPM drive add to a chassis running all day?
Typical idle power is under 8 W and active seek under 12 W, so the drive adds modest heat that a standard 3.5" bay airflow can dissipate.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



