DELL
DELL TYRVN 3.2TB enterprise SSD
3.2 TB enterprise NVMe SSD in E3.S form factor for Dell PowerEdge servers
- TypeRack
- 2 TB capacity supports data-intensive workloads
- NVMe interface enables high-speed storage access
- Compatible with PowerEdge R660, R760 and R960 servers
- Fits PowerEdge C6615, C6620 and MX760C platforms
- Works with PowerEdge R670, R770 and R860 systems
Dell 3.2 TB enterprise NVMe SSD
This drive is a 3.2 TB NVMe solid-state device built for Dell PowerEdge servers. It targets data-centre operators who need high-capacity flash storage in the E3.S form factor. The unit ships new with updated firmware and tested components.
E3.S form factor and Gen5 NVMe interface
The single specification that determines fit is the E3.S physical layout combined with a Gen5 NVMe link. Only platforms with native E3.S bays and Gen5 NVMe signalling can accept this module.
3.2 TB mixed-use capacity
The 3.2 TB TLC array handles sustained mixed read and write workloads typical of database and virtualisation tiers. Workloads that exceed this capacity or demand write-intensive endurance beyond the mixed-use rating will require additional drives.
Pontos fortes
- 2 TB capacity supports data-intensive workloads
- NVMe interface enables high-speed storage access
- Compatible with PowerEdge R660, R760 and R960 servers
- Fits PowerEdge C6615, C6620 and MX760C platforms
- Works with PowerEdge R670, R770 and R860 systems
Especificações
| Brand | DELL |
|---|---|
| Model | MZ3L63T2HFLT-00AD3, TYRVN |
| Type | Rack |
Perguntas sobre este artigo
How does the 3.2TB capacity translate to usable space once the drive is installed in a server?
The drive presents 3.2TB of raw capacity to the operating system; usable space will be slightly lower after formatting and any RAID overhead.
What does the NVMe Gen5 interface cap at in real-world throughput?
The NVMe Gen5 interface supports the full PCIe 5.0 x4 lane bandwidth, so sequential reads and writes scale up to the controller limits of the PM9D5a.
Will the E3.S form factor fit directly into a PowerEdge R760 drive bay?
Yes, the E3.S 1U form factor is natively supported in the listed PowerEdge models including the R760, R760XA and R760XD2.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
