DELL
DELL VYYT2 600GB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 600GB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate and hot-swap capability
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity600GB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 600 GB capacity supports data-intensive workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/s SAS interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell VYYT2 600GB SAS Hard Drive
The Dell VYYT2 is a 600GB 2.5-inch internal hard drive with a SAS interface running at 12Gb/s. It spins at 10000 RPM and is supplied as a bare drive with hot-swap capability for compatible bays.
Who this suits and who should look elsewhere
This drive suits servers and storage arrays that accept 2.5-inch SAS drives and require 10K performance. It is not for systems that lack a SAS controller or cannot accommodate a 2.5-inch form factor.
The specification that decides fit
The critical specification is the SAS 12Gb/s interface combined with the 2.5-inch 10000 RPM form factor; the host must support this exact interface and physical size for the drive to function.
Pontos fortes
- 600 GB capacity supports data-intensive workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/s SAS interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Especificações
| Brand | Dell |
|---|---|
| Model | VYYT2 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Perguntas sobre este artigo
What SAS controller or backplane do I need to connect this 12Gb/s drive?
A SAS host bus adapter or RAID controller with a 12Gb/s SAS port, or a server backplane wired for 12Gb/s, is required for the drive to negotiate its rated transfer rate.
Will this 2.5" 10000 RPM drive fit in a 3.5" hot-swap bay that currently holds slower SAS drives?
Yes, with a 2.5"-to-3.5" drive carrier the drive fits the bay; the SAS interface is backward-compatible so it will operate alongside existing 6Gb/s drives at the lower link speed.
How can I verify the drive is running at 12Gb/s after installation?
Check the negotiated link speed in your RAID controller BIOS, HBA utility, or OS tool such as smartctl; it should report 12Gb/s for this VYYT2 model.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



