Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black plastic centrifugal fan with seven curved blades and a metal flange mount

Ebm-Papst

Ebm-Papst R2E225-RA92-09 230V AC centrifugal case fan

SKU CH-JP29-GKSAQ MPN R2E225-RA92-09

230 V AC centrifugal fan with 225 mm fibreglass-reinforced impeller, ball bearing, IP44 protection and 414.94 CFM airflow

  • TypeCentrifugal fan
  • Bearing TypeBall Bearing
  • 2500 RPM at 50 Hz and 2600 RPM at 60 Hz for high airflow
  • 94 CFM airflow capacity moves large air volumes efficiently
  • Ball bearing motor ensures long life and reliable continuous operation
  • IP44 protection rating resists dust and splashing water ingress
  • Thermal overload protector wired internally safeguards motor from overheating

Target Application

This Ebm-Papst centrifugal fan operates on 230 VAC mains power at 50 or 60 Hz. It delivers up to 414.94 CFM airflow at 2560 RPM using a 225 mm fibreglass-reinforced plastic impeller. The IP44 rating and integrated thermal overload protector suit industrial enclosures or server racks that require direct AC-powered spot cooling.

Upgrade Path

The unit replaces older shaded-pole or sleeve-bearing blowers that lack the ball-bearing motor and higher 210 W peak input at 60 Hz. The jump is worth it when the installation demands continuous S1 operation between -25 °C and 70 °C ambient, or when the 3.5 µF run capacitor and sub-0.75 mA touch current simplify compliance with EN 60034-5 and IEC 60990.

Build Integration

Flange mounting with horizontal shaft or rotor-on-bottom orientation fits standard cut-outs without additional brackets. The variable cable exit and condensate discharge holes on the rotor side ease routing in tight cabinets. Ball bearings and insulation class F free the designer from frequent bearing swaps and allow storage extremes down to -40 °C.

Pontos fortes

  • 2500 RPM at 50 Hz and 2600 RPM at 60 Hz for high airflow
  • 94 CFM airflow capacity moves large air volumes efficiently
  • Ball bearing motor ensures long life and reliable continuous operation
  • IP44 protection rating resists dust and splashing water ingress
  • Thermal overload protector wired internally safeguards motor from overheating

Especificações

BrandEbmpapst
ModelR2E225-RA92-09
TypeCentrifugal fan
Bearing TypeBall Bearing

Perguntas sobre este artigo

What flange dimensions and mounting position does the 225 mm R2E225-RA92-09 require?

The fan uses a 225 mm flange mount and must be installed with the shaft horizontal or the rotor on the bottom; rotor-on-top orientation is only available on request.

How is the 230 V AC motor wired and what capacitor value is needed?

Connect the single-phase motor to 230 V AC at 50 or 60 Hz and fit the supplied 3.5 µF, 450 VDB capacitor; the thermal overload protector is already wired internally.

When should the ball bearing or impeller be checked on the R2E225-RA92-09?

Inspect the ball bearing for noise or play and verify the PA6 fibreglass-reinforced impeller for cracks during scheduled maintenance; the motor is rated for continuous S1 operation up to 70 °C ambient at 50 Hz.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.