Epoch
Epoch 400-ANPB 8TB 7.2K SATA 3.5" 6Gb/s internal hard drive replacement kit
8 TB, 7200 RPM SATA 3.5" drive kit built for Dell PowerEdge 12, 13, 14 generation and Tower 12, 14 servers
- InterfaceSATA
- Capacity8TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 8TB capacity stores large server datasets
- 7200 RPM spindle delivers responsive throughput
- SATA 6Gb/s interface integrates with existing controllers
- 5 inch form factor fits standard drive bays
- Compatible with 12 13 14 generation PowerEdge and Tower servers
Server storage upgrade
The Epoch 400-ANPB is an 8TB 3.5-inch SATA hard drive kit built for Dell PowerEdge and Tower servers across generations 12, 13 and 14. It targets administrators who need reliable bulk capacity for RAID arrays, backups or archival workloads in supported chassis.
Sustained write behaviour
At 7200 RPM the drive maintains consistent throughput during long sequential writes such as backup jobs or database logging. The SATA 6Gb/s link keeps the controller fed without the latency spikes seen on slower interfaces under heavy queue depths.
Compatibility constraint
This kit is validated only for the listed Dell PowerEdge R and T series models from generations 12, 13 and 14. It will not fit or function in servers outside that explicit compatibility list.
Pontos fortes
- 8TB capacity stores large server datasets
- 7200 RPM spindle delivers responsive throughput
- SATA 6Gb/s interface integrates with existing controllers
- 5 inch form factor fits standard drive bays
- Compatible with 12 13 14 generation PowerEdge and Tower servers
Especificações
| Interface | SATA |
|---|---|
| Capacity | 8TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Perguntas sobre este artigo
How much heat and noise does the 7200RPM 8TB drive add when running continuously in a server?
The 7200RPM mechanism spins constantly under load, producing typical enterprise-level vibration and audible seek noise; adequate chassis airflow is needed to keep temperatures within the drive’s operating range.
Which Dell PowerEdge models can accept this 3.5" SATA kit without extra brackets?
The kit fits PowerEdge 12G servers R220 R320 R420 R420xr R520 R620 R720 R720xd R820 R920 and 13G servers R230 R330 R430 R530 R530xd R630 R730 R730xd R830 R930 using their standard 3.5" bays.
Will this SATA 6Gb/s drive work reliably on an older PowerEdge 12G backplane that only negotiates 3Gb/s?
Yes, the SATA interface is backward compatible; the drive will negotiate down to 3Gb/s on 12G backplanes and still deliver full 8TB capacity at 7200RPM.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
