Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black standalone duplicator with 16 x 2 LCD and four M.2 slots

EZ Dupe, Inc.

EZ Dupe, Inc. NVMe Cyclone Pro 300 1-to-4 M.2 NVMe Duplicator

SKU CH-WZAB-3Y87V

Standalone M.2 NVMe duplicator copies up to four drives at 300 MB/s with five copy modes and eight erase modes including DoD standards

  • TypeM.2 NVME Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorM.2 NVME / Hard Drive SATA
  • Target1 to 4

Target 1 to 4

Speed 300MB/Sec (18GB/Min)

Option M.2 NVME & SATA HDD

  • Standalone 1-to-4 duplication at 300 MB/s
  • Five copy modes including whole media and non-zero
  • Eight erase modes from quick to DoD 7-pass
  • Real-time copy-and-compare for verified accuracy
  • Daisy-chain up to 255 units for mass production

Standalone M.2 NVMe duplicator

The EZ Dupe NVMe Cyclone Pro 300 is a standalone duplicator that copies one M.2 NVMe or SATA source to four targets at up to 300 MB/s. It handles B-key, M-key and B+M-key modules as well as 2.5" and 3.5" SATA drives up to 18 TB. A 16 x 2 LCD and indicator lights guide the operator through five copy modes and eight erase modes without a host PC.

Crossover duplication and daisy-chain expansion

The unit accepts M.2 NVMe, M.2 SATA and SATA drives in the same job, allowing crossover copies between form factors. Each target slot loads directly without trays. A daisy-chain port links up to 255 identical units so a single source can feed hundreds of targets across the chain. Event logs with time stamps and drive IDs download to the first destination slot for audit trails.

AC-powered with 128 MB buffer

An internal 115-230 V, 50/60 Hz supply powers the controller and all attached drives. The Athena controller uses a 128 MB buffer to sustain real-time copy-and-compare passes that verify each section before moving on. Quality-check functions report bad-sector counts, actual capacity and average read and write speeds for every target.

Pontos fortes

  • Standalone 1-to-4 duplication at 300 MB/s
  • Five copy modes including whole media and non-zero
  • Eight erase modes from quick to DoD 7-pass
  • Real-time copy-and-compare for verified accuracy
  • Daisy-chain up to 255 units for mass production

Especificações

BrandEZ Dupe
TypeM.2 NVME Duplicator
ModelNVME Cyclone Pro 300
Part NumberDM-HE3-5M04PP
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorM.2 NVME / Hard Drive SATA
Target1 to 4
Buffer Memory128M
ControllerAthena Controller
Supported MediaM.2 NVME / SATA Hard Drive Disk / Solid State Drive
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesSATA HDD Connection
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How many destination drives can the duplicator copy to at once?

The unit supports one source and up to four target drives simultaneously.

What is the sustained data transfer rate during long copy jobs?

The duplicator maintains a steady 300 MB/s transfer speed across all slots.

Which drive interfaces must the source and target drives use to work with this unit?

Drives must use M.2 NVMe, M.2 SATA or standard 2.5" and 3.5" SATA connections.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.