GUDGA
GUDGA GXF-Q-512-PRO-2280 512GB M.2 2280 PCIe 4.0 NVME SSD with Heatsink
- Internal Solid Stat…
- Consumer
112,99 US$
0.00142484BTC
Em stock
GUDGA
GUDGA GXF-Q-2TB-PRO-2280 internal SSD with heatsink
A 2 TB M.2 2280 NVME drive with a graphene heatsink delivers up to 7200 MB/s reads and 6400 MB/s writes for fast boot, load and transfer speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Fast boot and load times with 7200MB/s sequential read
- Quick file saves backed by 6400MB/s sequential write
- Long write life rated at 3600TB total bytes written
- Stable performance from 0°C to 70°C operating range
- Compact M.2 2280 form factor fits laptops and desktops
GUDGA GXF-Q 2TB NVMe drive
The GUDGA GXF-Q is a 2TB internal solid-state drive built on the M.2 2280 form factor with a PCIe 4.0 x4 interface and NVMe protocol. A graphene heat dissipation patch is integrated onto the drive to help manage thermals during sustained workloads. It is intended for consumer desktops, laptops and the PlayStation 5 console.
Suits PS5 and PCIe 4.0 systems.
This drive suits owners of a PS5 or a PC with an M.2 slot wired for PCIe 4.0 x4 who want faster boot, game loading and file transfers. Users whose motherboard or laptop provides only a PCIe 3.0 x4 or x2 M.2 slot will not reach the advertised speeds and should consider a drive matched to that narrower link.
7200 MB/s sequential read ceiling
The headline specification is a maximum sequential read of 7200 MB/s, paired with a 6400 MB/s sequential write rating and 3600 TBW endurance. If your workload demands sustained reads at or near that ceiling, the drive meets the requirement; if your platform caps at lower PCIe speeds, the extra headroom will go unused.
Pontos fortes
- Fast boot and load times with 7200MB/s sequential read
- Quick file saves backed by 6400MB/s sequential write
- Long write life rated at 3600TB total bytes written
- Stable performance from 0°C to 70°C operating range
- Compact M.2 2280 form factor fits laptops and desktops
Especificações
| Brand | GUDGA |
|---|---|
| Series | GXF-PRO |
| Model | GXF-Q-2TB-PRO-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | 7200MB/s |
| Max Sequential Write | 6400MB/s |
| Terabytes Written (TBW) | 3600TB |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
Outras versões deste modelo
Mais 3 nesta gama
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
GUDGA
GUDGA GXF-PRO 1TB M.2 2280 PCIe 4.0 NVME internal SSD with heatsink
- Internal Solid Stat…
- Consumer
134,99 US$
0.00170227BTC
Em stock
GUDGA
GUDGA GXF-Q-4TB-PRO-2280 internal SSD
- Internal Solid Stat…
- Consumer
500,99 US$
0.00631765BTC
Em stockPerguntas sobre este artigo
What does the 7200MB/s read speed mean once the drive is installed in a PS5 or PC?
The 7200MB/s figure is the maximum sequential read rate the controller can reach on a PCIe 4.0 x4 link; real-world game loads and OS boots will be lower but still noticeably faster than PCIe 3.0 drives.
How does the PCIe 4.0 x4 interface limit performance in practice?
The four-lane Gen 4 connection caps theoretical throughput at about 8GB/s, so the drive’s 7200MB/s read and 6400MB/s write ceilings are set by that bus width.
Will the included heatsink fit inside a standard M.2 2280 slot on a laptop or desktop motherboard?
Yes, the drive uses the 2280 form factor and ships with a graphene heat-dissipation patch designed to stay within the standard single-sided M.2 height allowance.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
