Intel
Intel D3-S4510 1.92TB 2.5" SATA Enterprise SSD
A 1.92 TB 2.5-inch SATA enterprise SSD built for read-intensive workloads with up to 560 MB/s reads and 97K IOPS
- Device TypeInternal Solid State Drive (SSD)
- 92 TB capacity supports read-intensive workloads
- SATA 6 Gb/s interface delivers 560 MB/s sequential read
- 97 K read IOPS accelerates random access performance
- 5 K write IOPS sustains mixed workload throughput
- 3D TLC NAND enables 1.9 TB density in 2.5" form factor
Purpose and audience
This 1.92TB 2.5-inch enterprise SSD is built for read-intensive server workloads. It targets administrators who need reliable bulk storage for databases, content delivery or archival tasks.
Deciding specification
The drive carries a read-intensive endurance rating with sequential speeds of 560 MB/s read and 510 MB/s write. Random performance reaches 97K read IOPS and 35.5K write IOPS over the SATA 6Gb/s interface.
Fit and alternatives
It suits teams that prioritise consistent read throughput and capacity over mixed-use endurance. Buyers who need higher write endurance or PCIe bandwidth should look at other enterprise models.
Pontos fortes
- 92 TB capacity supports read-intensive workloads
- SATA 6 Gb/s interface delivers 560 MB/s sequential read
- 97 K read IOPS accelerates random access performance
- 5 K write IOPS sustains mixed workload throughput
- 3D TLC NAND enables 1.9 TB density in 2.5" form factor
Especificações
| Device Type | Internal Solid State Drive (SSD) |
|---|
Perguntas sobre este artigo
Will the 560 MB/s sequential read speed be reached in a typical server backplane?
The drive is rated at up to 560 MB/s sequential read and 510 MB/s sequential write over the SATA 6Gb/s link; actual throughput depends on the controller and cable quality in the backplane.
Does the SATA 6Gb/s interface limit random IOPS in read-intensive workloads?
The SATA 6Gb/s interface caps the bus at 6 Gb/s; the drive delivers up to 97K random read IOPS and 35.5K random write IOPS within that limit.
Will the 2.5-inch 7 mm form factor fit a standard 2.5-inch hot-swap tray?
The drive uses a 2.5-inch 7 mm form factor, matching the standard dimensions for 2.5-inch hot-swap trays and caddies.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
