KINGBANK
KINGBANK 1TB M.2 2280 NVMe internal SSD
A 1 TB PCIe 4.0 NVMe internal SSD with up to 7400 MB/s read and 6700 MB/s write speeds in M.2 2280 form factor
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe 2.0
- Sequential reads up to 7400 MBps accelerate load times
- Sequential writes up to 6700 MBps speed large file saves
- PCIe 4.0 x4 interface enables high bandwidth for demanding workloads
- NVMe 2.0 protocol provides modern architecture for future compatibility
- 600 TBW endurance rating supports heavy daily write workloads
KINGBANK 1TB PCIe 4.0 NVMe SSD
The KINGBANK 1TB M.2 2280 NVMe internal SSD uses a PCIe 4.0 x4 interface with NVMe 2.0 protocol. A Maxio controller and 3D TLC NAND deliver sequential reads up to 7400 MBps and writes up to 6700 MBps. It fits PlayStation 5, desktops and laptops with an M.2 2280 slot.
Who this suits and who should look elsewhere
Builders upgrading a PS5 or a modern PC with a PCIe 4.0 M.2 slot will gain fast load times and large game storage. Systems limited to PCIe 3.0 or older M.2 sockets will not reach the advertised sequential speeds. Buyers needing higher endurance than 600 TBW should consider other models.
The spec that decides fit
The drive requires an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 2.0. Without that exact interface the drive will not operate at its rated 7400 MBps read and 6700 MBps write performance.
Pontos fortes
- Sequential reads up to 7400 MBps accelerate load times
- Sequential writes up to 6700 MBps speed large file saves
- PCIe 4.0 x4 interface enables high bandwidth for demanding workloads
- NVMe 2.0 protocol provides modern architecture for future compatibility
- 600 TBW endurance rating supports heavy daily write workloads
Especificações
| Brand | KingBank |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 2.0 |
| Controller | Maxio |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6700 MBps |
Perguntas sobre este artigo
What motherboard slot and protocol does the KINGBANK 1TB M.2 2280 NVMe internal SSD require?
The drive needs an M.2 2280 slot wired for PCIe 4.0 x4 and the NVMe 2.0 protocol to reach its rated 7400 MBps read and 6700 MBps write speeds.
Will the KINGBANK 1TB M.2 2280 NVMe internal SSD run on a PCIe 3.0 platform?
Yes, it is backward compatible with PCIe 3.0 x4 slots, though sequential speeds will be limited to the 3.0 ceiling rather than the advertised 7400 MBps read and 6700 MBps write.
How can I verify the KINGBANK 1TB M.2 2280 NVMe internal SSD is performing at its rated 7400 MBps read and 6700 MBps write?
Run a sequential benchmark such as CrystalDiskMark on a PCIe 4.0 x4 system; results approaching 7400 MBps read and 6700 MBps write confirm the drive and link are operating correctly.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
