KingSpec
KingSpec YSHS-32 32GB Half Slim SATA internal SSD
A 32 GB half-slim SATA SSD delivering 400 MB/s reads and 250 MB/s writes with 52,100 random read and 55,500 random write IOPS using 3D MLC NAND
- 32 GB capacity fits tight industrial bays
- Half-Slim SATA form factor slots into compact embedded systems
- Sequential read up to 400 MB/s speeds up data access
- Sequential write up to 250 MB/s handles sustained workloads
- 3D MLC NAND flash delivers 52,100 random read IOPS and 55,500 random write IOPS
Half-Slim SATA SSD for space-constrained systems
The KingSpec YSHS-32 is a 32GB internal solid-state drive built to the Half-Slim SATA form factor. It connects through a standard SATA III 6Gbps interface and uses 3D MLC NAND flash. This drive suits embedded PCs, thin clients or industrial appliances where a full 2.5-inch drive cannot fit.
No bundled accessories or software included
The product ships as a bare drive without mounting brackets, cables, cloning utilities or management software. Installation relies on the host device having a native Half-Slim SATA slot and its own firmware support. System integrators must provide any required adapters or imaging tools separately.
Limited by SATA III throughput and capacity
Sequential reads reach up to 400MB/s and writes up to 250MB/s, capped by the SATA III 6Gbps link. Random 4K performance reaches 52,100 read IOPS and 55,500 write IOPS. The 32GB capacity restricts use to boot drives, cache tiers or lightweight embedded workloads rather than general-purpose storage.
Pontos fortes
- 32 GB capacity fits tight industrial bays
- Half-Slim SATA form factor slots into compact embedded systems
- Sequential read up to 400 MB/s speeds up data access
- Sequential write up to 250 MB/s handles sustained workloads
- 3D MLC NAND flash delivers 52,100 random read IOPS and 55,500 random write IOPS
Especificações
Ainda não há especificações publicadas para este artigo.
Perguntas sobre este artigo
How long will the 3D MLC NAND flash in the KingSpec YSHS-32 last before it needs replacing?
The 3D MLC NAND flash is rated for higher endurance than standard TLC, and with 32 GB capacity it handles typical embedded write workloads for years without replacement.
What limits sustained write performance on the KingSpec YSHS-32 during long transfers?
Sequential write speed caps at 250 MB/s, and the SATA III 6 Gbps interface prevents higher throughput regardless of the 55,500 IOPS random write rating.
How much heat and power does the KingSpec YSHS-32 produce when running all day in a fanless appliance?
The half-slim SATA form factor has no moving parts and draws minimal power, so heat output stays low enough for passively cooled enclosures during continuous operation.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
