Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green 200-pin DDR2 SO-DIMM stick with black chips

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2SO/1GR 1GB DDR2 667 laptop RAM

SKU CH-K4KT-MAKYG MPN KVR667D2SO/1GR

A 1 GB DDR2 laptop module running at 667 MHz with CL5 latency and 1.80 V operation

  • Capacity1GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo
  • 1GB DDR2 667 MHz boosts multitasking responsiveness
  • 200-pin SO-DIMM fits compatible laptop slots
  • CL5 latency delivers smooth system operation
  • 80 V voltage matches DDR2 standard specs
  • PC2 5300 rating provides up to 5.3 GB/s bandwidth

1GB DDR2 667 SO-DIMM for legacy laptops

This Kingston KVR667D2SO/1GR module adds 1GB of DDR2 memory to compatible notebooks. It uses a 200-pin SO-DIMM form factor and runs at 667MHz with a PC2 5300 rating. The unbuffered design operates at 1.80V with CL5 latency. It is intended for older systems that accept DDR2 SO-DIMM modules.

Suits owners of older DDR2 notebooks

Buyers repairing or upgrading a laptop that specifically requires 200-pin DDR2 667 memory will find this module fits the slot and voltage requirement. Systems that require a different pin count, a higher DDR generation, or ECC registered memory cannot use this part. It is not suitable for desktops or modern laptops.

200-pin DDR2 SO-DIMM interface decides fit

The 200-pin SO-DIMM edge connector and DDR2 signalling are the single specification that determines compatibility. If the service manual or motherboard specification calls for 200-pin DDR2 SO-DIMM at 1.80V, this module matches that requirement. A different pin layout or memory generation will prevent installation.

Pontos fortes

  • 1GB DDR2 667 MHz boosts multitasking responsiveness
  • 200-pin SO-DIMM fits compatible laptop slots
  • CL5 latency delivers smooth system operation
  • 80 V voltage matches DDR2 standard specs
  • PC2 5300 rating provides up to 5.3 GB/s bandwidth

Especificações

BrandKingston
ModelKVR667D2SO/1GR
Capacity1GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Peso de envio0.05 kg
Dimensões da embalagem184 × 133 × 19 mm

Perguntas sobre este artigo

Does the unbuffered DDR2 SO-DIMM need any periodic maintenance or replacement?

No — the module has no moving parts, no heat spreader and no firmware, so it runs until a cell fails without any scheduled upkeep.

What limits continuous throughput on this 667 MHz CL5 stick?

The 5.3 GB/s peak bandwidth of the PC2-5300 interface is the hard ceiling; sustained reads and writes cannot exceed that rate.

How much heat and power does a 1.80 V DDR2 module add during all-day use?

At 1.80 V the stick draws only a few watts and stays cool enough to operate without a spreader or active airflow.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.