Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Small rectangular 1.9 inch e-paper display board with 91 black and white segments on a green PCB

LORDWORLD

LORDWORLD 1.9inch Segment E-Paper Module 91 Segments Black/White I2C development board

SKU CH-721D-N1CGD

A 1.9 inch segment e-paper display with 91 segments, I2C interface and ultra-low power consumption for Raspberry Pi, Arduino or STM32 projects

  • 9 inch segment display with 91 segments for clear readouts
  • I2C interface connects directly to Raspberry Pi, Arduino or STM32 boards
  • No backlight retains last image indefinitely after power is removed
  • Ultra-low power draw only during refresh cycles extends battery life
  • Onboard MOS level shifting supports both 3.3 V and 5 V microcontrollers

1.9-inch 91-segment e-paper module

This 1.9-inch segment e-paper module presents 91 individually driven segments in black and white. It targets developers and hobbyists building low-power readouts such as temperature and humidity meters or digital counters. The display retains its last image without any backlight when power is removed. An onboard MOS voltage translator allows direct connection to 3.3 V or 5 V logic.

I2C interface for Raspberry Pi Arduino STM32

The module communicates over I2C, so it needs only two signal lines plus power from a host controller such as a Raspberry Pi, Arduino or STM32 board. No separate level-shifting circuitry is required because the translator is already fitted. Ultra-low power draw means the supply is only taxed during refresh cycles, freeing budget for battery-operated or energy-harvesting designs.

Suits segmented readouts not bitmap graphics

Developers who need a crisp, sunlight-readable segmented display for instruments, clocks or status panels will find this module a good fit. It is not suited to projects that require full bitmap graphics, greyscale levels or partial screen updates. Buyers needing higher segment counts, colour capability or a larger active area should look at alternative display technologies.

Pontos fortes

  • 9 inch segment display with 91 segments for clear readouts
  • I2C interface connects directly to Raspberry Pi, Arduino or STM32 boards
  • No backlight retains last image indefinitely after power is removed
  • Ultra-low power draw only during refresh cycles extends battery life
  • Onboard MOS level shifting supports both 3.3 V and 5 V microcontrollers

Especificações

BrandLORDWORLD

Perguntas sobre este artigo

How many segments can the 1.9 inch display update before a refresh cycle becomes the limiting factor?

The module has 91 segments that only draw power during a refresh, so sustained use is limited by how often you rewrite the display rather than by continuous current draw.

Does the board generate noticeable heat or fan noise when driven continuously from a 3.3 V supply?

With no backlight and ultra-low power consumption limited to refresh events, the board produces negligible heat and has no active cooling, so it runs silently.

Which controller board and voltage level must I already have to communicate over the I2C interface?

You need a Raspberry Pi, Arduino or STM32 type MCU that can operate at 3.3 V or 5 V, because the onboard MOS translator handles both logic levels for the I2C bus.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.