Mean Well
Mean Well HRP-450-15 15V 30A 450W 13-Pin power supply
Delivers 15 V at 30 A with 450 W output, active PFC, constant-current limiting, remote sense, DC-OK signal and a 13-pin connector in a 1 U forced-air enclosure
- TypeAT
- Universal AC input handles 300 VAC surge for 5 seconds
- Active PFC function improves power factor and efficiency
- Constant current limiting protects against overload damage
- Remote sense function compensates voltage drop across cables
- 100 % full load burn-in test ensures reliability
Industrial AC/DC unit for 15 V systems
The Mean Well HRP-450-15 is a 450 W single-output supply that delivers 15 V at 30 A through a 13-pin connector. It accepts universal AC input and withstands 300 VAC surge for 5 seconds. The 1U low-profile AT form factor fits standard industrial chassis. Built-in active PFC and a DC fan provide forced-air cooling.
Continuous 450 W with active PFC and protections
Under sustained load the unit maintains full rated output after a 100 % burn-in test. Active PFC corrects the input current waveform while short-circuit, overload, over-voltage and over-temperature circuits protect the load. Constant current limiting and remote sense keep voltage stable at the point of use. No-load draw stays below 0.5 W.
15 V 30 A fixed output decides fit
The single 15 V rail at 30 A is the specification that determines compatibility; equipment requiring a different voltage or higher current cannot use this supply. Remote ON/OFF control and a 5 V standby line support system integration. A 5-year warranty backs the design.
Pontos fortes
- Universal AC input handles 300 VAC surge for 5 seconds
- Active PFC function improves power factor and efficiency
- Constant current limiting protects against overload damage
- Remote sense function compensates voltage drop across cables
- 100 % full load burn-in test ensures reliability
Especificações
| Type | AT |
|---|
Perguntas sobre este artigo
How loud is the built-in DC fan when the HRP-450-15 runs at full 450 W load all day?
The unit uses forced air cooling by a built-in DC fan; Mean Well does not publish a decibel figure for the HRP-450-15, so exact noise level at continuous full load is not available.
What mating connector do I need for the 13-pin output on this supply?
The HRP-450-15 provides a 13-pin output header; you must source a compatible 13-pin plug or cable assembly separately to connect your load.
Will the remote sense terminals on this unit compensate for voltage drop in longer cables to older equipment?
Yes, the built-in remote sense function lets the supply regulate at the load end, correcting for cable losses when powering legacy gear.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



