Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

MINUTEMAN

MINUTEMAN RPM308I2LCD-HW PDU Switched 208V 30A Hardwire 8xC13 10ft LCD Network

SKU CH-57JQ-8QG26 MPN RPM308I2LCD-HW

A switched 208 V PDU with eight C13 outlets, hard-wired 30 A input, 10 ft cord and LCD network monitoring

  • TypePower Distribution Units
  • StyleHorizontal Installation, 0U Vertical Installation
  • Certifications62368-1 Certification
  • Input Voltage208V
  • Maximum Input Current30A
  • Input Connector(s)Hardwire
  • Remote power control via IP-addressable manager with built-in web server
  • Switched outlets enable per-device reboot over network without physical access
  • Local LCD shows real-time amps IP temperature humidity at a glance
  • 8 C13 receptacles on 208V 30A hardwire feed with 10ft cord
  • 62368-1 certified with circuit-breaker overload protection for safe operation

208 V 30 A Hardwired Switched PDU

The Minuteman RPM308I2LCD-HW is a rack-mountable power distribution unit that accepts a 208 V 30 A hardwire feed and provides eight IEC C13 outlets. It supports both horizontal and 0U vertical mounting. A built-in LCD shows real-time current, IP address, temperature and humidity. The unit includes a 10 ft cord and carries 62368-1 certification.

Network Managers Needing Outlet-Level Control

This PDU suits administrators who want to reboot individual devices remotely via web browser, SNMP, SSH or Telnet. It provides email and SNMP trap alerts, power sequencing, and logs up to 5,000 consumption and event records. It is not for operators who only need basic power distribution without IP-addressable switching or environmental monitoring.

Hardwire Input Connection

The unit terminates in a hardwire input rather than a plug, so installation requires permanent wiring by a qualified electrician. Verify that your facility can provide a 208 V 30 A circuit and that the 10 ft lead reaches the distribution panel before ordering.

Pontos fortes

  • Remote power control via IP-addressable manager with built-in web server
  • Switched outlets enable per-device reboot over network without physical access
  • Local LCD shows real-time amps IP temperature humidity at a glance
  • 8 C13 receptacles on 208V 30A hardwire feed with 10ft cord
  • 62368-1 certified with circuit-breaker overload protection for safe operation

Especificações

BrandMINUTEMAN
ModelRPM308I2LCD-HW
TypePower Distribution Units
StyleHorizontal Installation, 0U Vertical Installation
Certifications62368-1 Certification
Input Voltage208V
Maximum Input Current30A
Input Connector(s)Hardwire
Cord Length10 ft
Output Connector(s)Rear Panel Receptacles: (8) C13
Maximum Output Current30A
Overload ProtectionInput Circuit Breaker Protection
FeaturesIP-addressable Remote Power Manager
Built-in Web Server to support Remote Power Management
Event Notifications via Email or SNMP Traps
Local LCD displays Amps, IP Address, Temperature and/or Humidity
Daily, Weekly, Monthly & Yearly Power Consumption Data
10/100 Base-T Ethernet Port
IPv4, IPv6 Support and SNMP Support (v1,v2c,v3)
Telnet, SSH Encryption Support
Radius Authentication
User Account for Three Different Permissions Management Systems
Alarm Notification via Email, SNMP, Syslog, LED or Audible Alarm
SSL Web Browser for Set Up and Operation
IP Address Filtering
Maximum 5,000 E
Peso de envio5.44 kg
Dimensões da embalagem490 × 330 × 155 mm

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I confirm the PDU is operating correctly after installation?

The local LCD shows real-time Amps, IP address, temperature and humidity, while the built-in web server and SNMP traps provide remote verification of each of the eight C13 outlets and total 30 A load.

What ships with the unit and what must I source separately?

The package includes the 0U rack-mount PDU with a 10 ft hardwire input lead; you must supply the 208 V 30 A feed wiring, IEC C13 power cords for connected devices and a CAT5 network cable for the RJ-45 port.

Which capacity matches a 208 V 30 A rack circuit with eight C13 loads?

This model delivers 208 V at 30 A through eight rear C13 receptacles, matching a single 30 A branch circuit; no other voltage or outlet-count versions are described for this part number.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.