Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Purple braided PSU cable extension kit with 24-pin ATX, two 8-pin CPU and three 8-pin GPU cables plus combs

myVolts

myVolts PSU Cable Extension Kit 50cm Purple 1x 24P 2x 8P CPU 3x 8P GPU 18AWG

SKU CH-DRR7-PZTNP

A 50 cm sleeved extension kit adds one 24-pin ATX, two 8-pin CPU and three 8-pin GPU cables using 18 AWG UL 1015 tinned copper wire and includes 18 cable combs for clean routing

  • TypeAT
  • 50cm purple extensions add vivid colour to your build
  • 18AWG UL 1015 tinned copper handles heat and humidity
  • 1×24P 2×8P CPU 3×8P GPU covers full power needs
  • High-density braided sleeves balance stiffness and routing ease
  • 15 combs plus 3 ATX combs keep cables neatly aligned

Cable Extension Kit for PSU

This 50 cm extension kit adds length to existing power supply cables using 18AWG UL 1015 tinned copper wires wrapped in high-density braided sleeving. The set includes one 24-pin ATX motherboard extension, two 4+4-pin EPS CPU extensions and three 6+2-pin PCIe GPU extensions. Fifteen 8-pin combs and three 24-pin combs are supplied for clean routing.

Suited for builders who want a single-colour accent

The purple sleeving and included combs create a uniform look for custom-mod projects that value visual consistency. Seventeen colour choices let the kit match most build themes. Buyers who need pre-curved cables or extensions shorter than 30 cm should look at something else.

Wire gauge and sleeve determine routing behaviour

Thick 18AWG conductors inside a dense braided jacket give the cables a stiff yet adaptable feel that holds shaped bends once trained. This balance of rigidity and flexibility is the specification that decides whether the extensions suit a particular routing plan.

Pontos fortes

  • 50cm purple extensions add vivid colour to your build
  • 18AWG UL 1015 tinned copper handles heat and humidity
  • 1×24P 2×8P CPU 3×8P GPU covers full power needs
  • High-density braided sleeves balance stiffness and routing ease
  • 15 combs plus 3 ATX combs keep cables neatly aligned

Especificações

TypeAT

Perguntas sobre este artigo

What clearance does the 50 cm 24-pin ATX extension need behind the motherboard tray?

The 500 mm 24-pin extension adds 50 cm of cable run; allow at least that much depth behind the tray plus room for the included 24-pin combs to sit flat.

Which way round do the 4+4-pin CPU and 6+2-pin GPU connectors go on the PSU side?

Match the 4+4-pin blocks to the EPS sockets and the 6+2-pin blocks to the PCIe sockets on the PSU; the split sections only fit one orientation.

When should the 18 AWG UL 1015 tinned copper extensions be inspected or replaced?

Check the braid and connectors whenever the build is opened; replace any cable showing melted pins, cracked sleeving or corroded copper.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.