Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600MHz ECC Registered RDIMM Supermicro H13SSF memory upgrade

SKU CH-1Y5P-JVPX6

1.1 TB kit of twelve 96 GB DDR5-5600 ECC registered RDIMMs validated for the Supermicro H13SSF motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity with twelve 96GB modules for maximum server density
  • DDR5 5600 speed (PC5-44800) matches the Supermicro H13SSF memory controller
  • CL46 latency at 1.10V delivers rated performance without overclocking
  • Registered ECC 2Rx4 architecture prevents silent data corruption under full load
  • 288-pin RDIMM form factor fits the board's required memory slots exactly

Supermicro H13SSF 1.1TB DDR5 Kit

This 1.1TB kit contains twelve 96GB DDR5 5600MHz Registered ECC RDIMMs built for the Supermicro H13SSF motherboard. It targets administrators who need maximum registered memory capacity in a single validated package. Systems requiring unbuffered UDIMMs or SODIMMs cannot use these modules.

Verified Fitment and Registered ECC

The kit matches the H13SSF's required 288-pin RDIMM form factor, 2Rx4 rank structure, 1.10V voltage and CL46 timing so the memory controller recognises every module at rated speed. Registered buffering offloads the controller for stable fully-populated operation while ECC corrects single-bit errors to prevent silent data corruption.

Installation Checks and Population Rules

Installation follows standard RDIMM seating in 288-pin slots but the motherboard manual must be consulted for supported capacities and approved population order before purchase. Incorrect slot sequencing or unsupported total capacity are the most common reasons the kit will not initialise at full speed.

Pontos fortes

  • 1TB total capacity with twelve 96GB modules for maximum server density
  • DDR5 5600 speed (PC5-44800) matches the Supermicro H13SSF memory controller
  • CL46 latency at 1.10V delivers rated performance without overclocking
  • Registered ECC 2Rx4 architecture prevents silent data corruption under full load
  • 288-pin RDIMM form factor fits the board's required memory slots exactly

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Perguntas sobre este artigo

Will the 12 modules in this 1.1TB kit need replacement if a single DIMM fails?

The kit contains 12 individual 96GB RDIMMs. If one module develops a fault, only that specific DIMM needs to be replaced rather than the entire 1.1TB set.

Does the CL46 latency limit throughput when the Supermicro H13SSF runs all 12 slots at DDR5-5600 continuously?

The CAS latency is fixed at CL46 for this 5600MHz kit. The registered buffer on each 2Rx4 module manages electrical loading across all 12 slots, allowing the memory controller to maintain the rated 5600MT/s speed without timing relaxation.

How much heat do the 12 unbuffered RDIMMs generate at 1.10V when the server runs 24/7?

Each 96GB module operates at 1.10V without a heat spreader. The registered architecture reduces per-pin current draw, and the 2Rx4 organisation spreads density across more chips, keeping individual component temperatures lower during sustained full-population workloads.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.