NEMIX RAM
NEMIX RAM 128GB 8x16GB DDR5 5600MHz ECC Registered RDIMM CL46 1.1V Supermicro H13DSG-O-CPU memory upgrade
Eight 16 GB DDR5 5600 MHz ECC registered RDIMMs at 1.1 V CL46 deliver 128 GB of server-grade memory validated for the Supermicro H13DSG-O-CPU motherboard
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128 GB total capacity from eight 16 GB modules
- DDR5 5600 MHz speed with CL46 latency for rated performance
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches the board's memory-controller specification
- 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU motherboard
Exact-match DDR5-5600 ECC RDIMM kit
This 128 GB kit contains eight 16 GB DDR5 Registered DIMMs rated at 5600 MHz (PC5-44800) with CL46 latency and 1.1 V operation. Each module is a 1Rx8 288-pin RDIMM with on-die ECC, built from major OEM DRAM. It is configured as a direct upgrade for the Supermicro H13DSG-O-CPU motherboard.
Suited for capacity-hungry server builds
The registered architecture and ECC let the memory controller drive all eight slots at full speed, making this kit a fit for virtualization hosts, database nodes and other workloads that need maximum capacity per channel. It is not for platforms that accept only unbuffered UDIMMs or SO-DIMMs, nor for boards that cannot populate eight RDIMM slots at the rated frequency.
Registered RDIMM form factor decides fit
The motherboard requires 288-pin DDR5 Registered DIMMs; unbuffered or SO-DIMM modules will not seat or function. Verify the board’s qualified-vendor list and population rules before ordering to ensure the 8 x 16 GB configuration is supported.
Pontos fortes
- 128 GB total capacity from eight 16 GB modules
- DDR5 5600 MHz speed with CL46 latency for rated performance
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches the board's memory-controller specification
- 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU motherboard
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Perguntas sobre este artigo
What motherboard slot and memory type must my Supermicro H13DSG-O-CPU have to accept this 288-pin DDR5 RDIMM kit?
The motherboard needs DDR5 RDIMM slots; this 288-pin Registered kit is built to the exact pinout and signalling the H13DSG-O-CPU expects.
If I keep some existing DDR5 5600 RDIMMs, will this 8-module 1Rx8 CL46 kit run alongside them at rated speed?
Mixing ranks or timings can force the controller to down-clock; for guaranteed 5600 MT/s operation populate all eight slots with this matched 1Rx8 CL46 kit.
After installing all eight 16 GB modules, how do I confirm the server sees the full 128 GB at DDR5-5600 with ECC active?
Check the BIOS memory information screen — it should report 128 GB total, 5600 MT/s speed, and ECC enabled for each populated channel.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133699BTC
Em stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010175BTC
Em stock