NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 1Rx8 288-pin UDIMM memory upgrade
16 GB DDR4 3200 UDIMM module with CL22 timing for compatible Samsung desktop PCs
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity lifts multitasking headroom for demanding workloads
- 3200 MT/s DDR4 speed feeds data to the CPU faster
- CL22 latency keeps response times tight under load
- 2 V operation reduces power draw and heat output
- 288-pin UDIMM form factor fits standard desktop DIMM slots
Samsung-compatible DDR4 UDIMM
This NEMIX RAM module adds 16GB of DDR4 3200 memory to compatible Samsung desktop systems. It uses a 288-pin UDIMM form factor with a 1Rx8 rank configuration. The module runs at 1.20V with a CAS latency of CL22 and has no heat spreader. It is sold new as a single 16GB stick.
Desktop owners with matching Samsung platforms
This upgrade suits users who have verified their Samsung desktop accepts PC4-25600 non-ECC unbuffered UDIMMs. It is not for builders needing ECC error correction or registered modules for server boards. Buyers whose systems require a different voltage, pin count, or DDR generation should look elsewhere. Systems that only support lower speeds will not gain the rated 3200MT/s.
PC4-25600 CL22 1Rx8 specification
The decisive figure is the PC4-25600 CL22 1Rx8 rating at 1.20V on a 288-pin UDIMM. Match this exact speed grade, latency, rank, voltage, and pin layout against the motherboard manual or Samsung service documentation before purchase. A mismatch in any of these parameters will prevent the module from functioning correctly.
Pontos fortes
- 16 GB capacity lifts multitasking headroom for demanding workloads
- 3200 MT/s DDR4 speed feeds data to the CPU faster
- CL22 latency keeps response times tight under load
- 2 V operation reduces power draw and heat output
- 288-pin UDIMM form factor fits standard desktop DIMM slots
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Perguntas sobre este artigo
Does this 288-pin UDIMM fit a standard desktop DDR4 slot?
Yes, the module uses the 288-pin DDR4 UDIMM form factor that matches any desktop motherboard slot wired for DDR4 memory.
What is the correct way to seat the 1Rx8 module so the motherboard recognises the full 16 GB?
Align the notch with the slot key, press straight down until both retention clips click, then verify in BIOS that the capacity shows 16 GB at 3200 MT/s.
Will the Samsung-compatible chips ever need a firmware update or replacement under normal use?
No firmware is involved; the memory is a passive component and only requires replacement if a hardware fault develops.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.



