NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC UDIMM CL22 1.2V 2Rx8 SuperMicro X12STL-IF
16 GB DDR4 3200 ECC UDIMM with CL22 latency and 1.2 V operation for Supermicro X12STL-IF systems
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection ensures data integrity for critical workloads
- 3200 MHz DDR4 speed delivers responsive server performance
- 2 V operation reduces power draw and heat
- 2Rx8 dual-rank organisation improves memory throughput
- Validated compatibility with SuperMicro X12STL-IF motherboards
Compatible Memory for SuperMicro X12STL-IF
This 16GB DDR4 3200 ECC UDIMM module is built for the SuperMicro X12STL-IF motherboard. It delivers 16GB of error-correcting memory at 3200MHz with CL22 latency and 1.2V operation. The single-rank 2Rx8 design uses major OEM chips from Samsung, Micron or Hynix for server-grade reliability.
Suited for ECC Workstations Not for Non-ECC Systems
This module suits administrators upgrading SuperMicro workstations or servers that require unbuffered ECC memory. It fits 288-pin DDR4 slots and runs at standard 1.20V without a heat spreader. Buyers whose boards lack ECC support or need registered DIMMs should look at something else.
Deciding Spec ECC Unbuffered UDIMM
The single specification that decides compatibility is the ECC unbuffered UDIMM format. Only motherboards that accept 288-pin DDR4 ECC unbuffered modules can use this part. Verify your system documentation for ECC UDIMM support before purchase.
Pontos fortes
- ECC protection ensures data integrity for critical workloads
- 3200 MHz DDR4 speed delivers responsive server performance
- 2 V operation reduces power draw and heat
- 2Rx8 dual-rank organisation improves memory throughput
- Validated compatibility with SuperMicro X12STL-IF motherboards
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM |
Perguntas sobre este artigo
What real-world speed will the DDR4 3200 module run at in the SuperMicro X12STL-IF?
The module is rated for DDR4 3200 (PC4-25600). Actual operating speed depends on the motherboard's memory controller and BIOS settings; it will run at the highest speed the platform supports up to 3200 MT/s.
How does the ECC unbuffered design affect compatibility with the X12STL-IF?
This is a 288-pin DDR4 ECC UDIMM (unbuffered). The X12STL-IF must support unbuffered ECC UDIMMs; registered or load-reduced modules are not compatible with this UDIMM slot type.
Will the 2Rx8 16 GB stick fit the X12STL-IF DIMM slots without a heat spreader?
Yes. It is a standard-height 288-pin UDIMM with no heat spreader, so it fits the X12STL-IF DIMM slots. The board's slot spacing and latch mechanism accept this form factor.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133516BTC
Em stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010161BTC
Em stock