Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green circuit board SODIMM module with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC Unbuffered SODIMM CL46 1.1V 262-pin memory upgrade

SKU CH-4STB-WB0DK

16 GB DDR5 5600 MHz ECC unbuffered SODIMM, CL46 at 1.1 V, 262-pin, verified for Supermicro X14SAV-LVDS

  • Capacity16GB
  • Type262-Pin DDR5 ECC SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • Error-correcting ECC memory prevents silent data corruption and unplanned reboots
  • Exact DDR5 5600 CL46 1.1V 1Rx8 specification matches the Supermicro X14SAV-LVDS memory controller
  • 262-pin unbuffered SODIMM form factor fits the required motherboard slot, not a full-size UDIMM or RDIMM
  • Major OEM Samsung, Micron or Hynix DRAM chips provide consistent quality and reliability
  • 16 GB single-module capacity enables straightforward population according to system manual rules

Exact-match DDR5 ECC upgrade for Supermicro

This 16 GB DDR5 5600 module is built to the precise rank, voltage and timing the Supermicro X14SAV-LVDS memory controller expects. It installs as a single 1Rx8 unbuffered ECC SODIMM so the system recognises full capacity and runs at its rated speed without manual tuning.

262-pin unbuffered ECC SODIMM form factor

The stick uses the 262-pin SODIMM layout required by the board, not a full-size UDIMM or RDIMM, so it seats correctly in the available slots. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during critical workloads.

Verify your system manual for population rules

Supported capacities, approved slot order and installation steps differ between Supermicro models, so confirm the exact configuration before ordering. Buyers needing larger total memory or a different rank structure should check the platform's qualified-vendor list for compatible alternatives.

Pontos fortes

  • Error-correcting ECC memory prevents silent data corruption and unplanned reboots
  • Exact DDR5 5600 CL46 1.1V 1Rx8 specification matches the Supermicro X14SAV-LVDS memory controller
  • 262-pin unbuffered SODIMM form factor fits the required motherboard slot, not a full-size UDIMM or RDIMM
  • Major OEM Samsung, Micron or Hynix DRAM chips provide consistent quality and reliability
  • 16 GB single-module capacity enables straightforward population according to system manual rules

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered SODIMM Memory
Part NumberMSE44800-618K1
Capacity16GB
Type262-Pin DDR5 ECC SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN ECC SODIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What speed does the DDR5 5600MHz interface actually run at in this Supermicro board?

The module is rated at DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard's memory controller supports it.

Will this 262-pin SODIMM fit the Supermicro X14SAV-LVDS motherboard's memory slots?

Yes, the 262-pin DDR5 ECC Unbuffered SODIMM form factor matches the slot type required by the X14SAV-LVDS.

How do I install the module and which slot should I populate first?

Align the notch on the 262-pin edge connector with the slot key, press firmly until the side clips click, and follow the motherboard manual for the approved population order.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.