Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 PC5-44800 CL46 1.1V 2Rx8 ECC RDIMM memory upgrade for Supermicro H13DSG-O-CPU

SKU CH-36N1-006SS

Six 32 GB DDR5 registered ECC RDIMMs totalling 192 GB at 5600 MT/s, CL46, 1.1 V, validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU DIMM slots

192GB DDR5-5600 ECC RDIMM kit for Supermicro

This 192GB kit contains six 32GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H13DSG-O-CPU memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. The modules are new and validated for this specific motherboard.

Thermals noise and power at 1.1V DDR5-5600

Each module operates at 1.10V with CL46 latency and no heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so all six slots stay stable under sustained workloads. Power draw scales with the 5600 MT/s data rate and 2Rx8 organisation in typical enterprise use.

Replaces partial or mismatched DDR5 populations

The kit upgrades configurations that cannot reach 192GB with fewer modules or mixed-rank DIMMs that force the controller to down-clock. It is not suited for boards that require UDIMM or SODIMM form factors, nor for systems limited to lower maximum capacities or different DDR generations. Verify the motherboard manual for approved population rules before installing.

Pontos fortes

  • 192 GB total capacity from six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU DIMM slots

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Perguntas sobre este artigo

How do I install the 6x32GB DDR5 RDIMM kit into the Supermicro H13DSG-O-CPU and what slot order mistake should I avoid?

Power down the server, open the chassis, and insert each 288-pin RDIMM into the slots specified by the motherboard manual for a six-module population; the common error is filling slots sequentially from CPU 1 instead of following the board's prescribed interleaving sequence.

What maintenance or replacement will this 192GB ECC Registered kit need over its service life?

No routine maintenance is required; the modules have no heat spreaders to clean and no moving parts. Replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What is the first limit reached when the 1.1V CL46 DDR5-5600 memory runs under sustained full load?

The CAS latency of CL46 at 5600 MT/s defines the timing ceiling; under continuous heavy throughput the memory controller cannot issue requests faster than this latency allows, making it the primary performance boundary.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.