Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR4 UDIMM sticks with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2666MHz ECC UDIMM memory upgrade

SKU CH-X3K2-FC2DP

ECC UDIMM kit adds 32 GB of DDR4-2666 memory with CL19 timing and 1.2 V operation for ASUS WS C246M PRO workstation motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Size 32GB 2X16GB

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact-match 32GB kit runs at DDR4 2666 CL19 1.20V for full rated speed
  • 2Rx8 unbuffered UDIMM fits ASUS WS C246M PRO and PRO/SE workstation boards
  • 288-pin DDR4 form factor matches motherboard slot requirements not RDIMM or SODIMM
  • Lifetime replacement warranty with free US-based technical support included

System-specific DDR4 ECC kit

This NEMIX RAM kit provides 32 GB of DDR4-2666 ECC UDIMM memory in two 16 GB modules. It targets owners of the ASUS WS C246M PRO or WS C246M PRO/SE workstation motherboards who need the exact rank, voltage and timing their board expects. The unbuffered 288-pin DIMMs install directly into the board's DDR4 slots.

Replaces mismatched or non-ECC modules

Builders upgrading from non-ECC UDIMMs or from modules with different ranks, voltages or CAS latency gain the error-correcting reliability the platform requires. The jump is worth it when silent data corruption, unexpected crashes or unplanned reboots threaten workload integrity on these specific ASUS boards.

Fits the board's population rules

The 2Rx8 organization, 1.2 V operation and CL19 timing match the memory controller's spec so the system recognises full capacity at rated speed. No heat spreader is fitted, leaving clearance for dense DIMM layouts. Buyers who need registered DIMMs, SODIMMs or a different DDR generation cannot use this kit.

Pontos fortes

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact-match 32GB kit runs at DDR4 2666 CL19 1.20V for full rated speed
  • 2Rx8 unbuffered UDIMM fits ASUS WS C246M PRO and PRO/SE workstation boards
  • 288-pin DDR4 form factor matches motherboard slot requirements not RDIMM or SODIMM
  • Lifetime replacement warranty with free US-based technical support included

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-628K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 2666MHz PC4-21300 2Rx8 1.2V 288-PIN ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does the 288-pin DDR4 UDIMM form factor fit the ASUS WS C246M PRO motherboard?

Yes, the kit uses the 288-pin DDR4 ECC UDIMM form factor required by the ASUS WS C246M PRO and WS C246M PRO/SE workstation motherboards.

Which DIMM slots should I populate first when installing the 2x16GB kit?

Follow the motherboard manual's approved population order for dual-channel operation; the board's memory-population rules dictate the correct slot sequence.

Will the Samsung, Micron or Hynix chips used in these modules require any firmware updates later?

No firmware updates are needed for the memory chips; the modules operate at 1.2V with CL19 timing and ECC error correction without ongoing maintenance.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.