Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 5600MHz CL46 1.1V 288-pin UDIMM Kit for ASRock B650M-C

SKU CH-87M9-HGD6N

32 GB kit of two 16 GB DDR5 5600 MHz CL46 1.1 V 288-pin UDIMM modules validated for the ASRock B650M-C motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 32 GB kit delivers full capacity for multitasking with two 16 GB DDR5 modules
  • DDR5-5600 speed matches the motherboard's rated frequency for stable operation
  • CL46 latency and 1.10 V voltage meet the memory controller's exact timing requirements
  • 288-pin unbuffered UDIMM form factor fits the ASRock B650M-C DIMM slots precisely
  • Built with major OEM chips from Samsung, Micron or Hynix for tested reliability

Exact-match upgrade for ASRock B650M-C

This 32 GB kit delivers two 16 GB DDR5 modules rated at 5600 MT/s with CL46 timing at 1.1 V. It is built for desktop systems that require 288-pin unbuffered non-ECC UDIMMs and matches the memory controller expectations of the ASRock B650M-C motherboard. The 1Rx8 rank configuration ensures full capacity recognition at the rated speed. Builders seeking a direct replacement for factory memory will find the specification alignment straightforward.

Major OEM chips and standard UDIMM form factor

Modules use Samsung, Micron or Hynix components tested for stability at the rated frequency, latency and voltage. The 288-pin UDIMM design fits the desktop DIMM slots on the target board without adapters or special mounting hardware. No heat spreader is included, so clearance around the slots remains unchanged. Buyers who need ECC error correction or registered signalling should look elsewhere, as this kit provides neither.

Low-voltage operation at rated speed

Running at 1.1 V, the kit draws minimal power while maintaining 5600 MT/s throughput. The absence of a heat spreader means the modules rely on case airflow for cooling, which is typical for standard JEDEC-speed DDR5. Acoustic impact is zero because there are no moving parts. Systems that cannot supply 1.1 V DDR5 or that require higher-voltage XMP profiles will not benefit from this kit.

Pontos fortes

  • 32 GB kit delivers full capacity for multitasking with two 16 GB DDR5 modules
  • DDR5-5600 speed matches the motherboard's rated frequency for stable operation
  • CL46 latency and 1.10 V voltage meet the memory controller's exact timing requirements
  • 288-pin unbuffered UDIMM form factor fits the ASRock B650M-C DIMM slots precisely
  • Built with major OEM chips from Samsung, Micron or Hynix for tested reliability

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Does DDR5 5600 PC5-44800 run at its rated speed on the ASRock B650M-C without manual tuning?

Yes, the kit is spec-matched to the board's memory controller so it is recognised at full capacity and runs at DDR5 5600 with CL46 at 1.1 V without extra configuration.

Will two 1Rx8 288-pin UDIMM modules fit the ASRock B650M-C DIMM slots?

The board uses standard 288-pin DDR5 UDIMM slots; each 16 GB 1Rx8 module fits directly and the 2 x 16 GB kit matches the board's population rules.

How do I install the modules so the system boots at 5600 MHz instead of a lower speed?

Power off, open the case, align each module's notch with the slot key, press firmly until both retention clips click, then power on — the board will train at DDR5 5600 automatically.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.